Description
Voltage-Verified Dispatch — every DW802 edge bander ships with confirmed voltage, plug type, and PLC language matched to the destination grid, preventing dead-on-arrival equipment.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | DW802 |
| Product Type | Automatic Edge Banding Machine |
| Total Power | 4200W |
| Voltage & Frequency | 220V / 380V / customization (50Hz or 60Hz confirmed at order) |
| Control System | PLC |
| Overall Dimensions (L×W×H) | 130 × 60 × 95 cm |
| Net Weight | 135 kg |
| Minimum Sheet Length | 25 cm |
| Minimum Sheet Width | 10 cm |
| Edge Banding Height Range | 0–50 mm |
| Edge Banding Thickness Range | 0.3–3 mm |
| Edge Banding Motor Power | 140W |
| Transmission Motor Power | 140W |
| Trimming Motor Power | 800W × 2 |
| Polishing Motor Power | 180W × 2 |
| Vacuum Power | 1200W |
| Glue Pot Capacity | 4000 ml |
| Air Source Pressure | 0.4–0.8 MPa |
| Standard Functions | Edge banding, trimming, polishing, automatic head and tail cutting, vacuum |
| Feed Speed | (basis to be confirmed) |
| Panel Thickness Range | (basis to be confirmed) |
| Tolerance | (basis to be confirmed) |
| Language Options | Chinese, English; custom languages available (Spanish, French, etc.) |
| Assembly State | Fully assembled, ready to operate |
| Plug Options | EU, USA, AU, UK |
| Certifications | CE, ISO 9001 |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom cabinet door edge sealing | MDF and particleboard with PVC or veneer banding |
| Home-decoration panel finishing | Ecological board and plywood straight-edge panels |
| Small furniture workshop production | Solid wood board edge banding at moderate volumes |
| Joinery shop first automation step | Mixed board materials in batch or single-piece runs |
Why Voltage Must Be Settled Before the Order Is Placed
A machine built for 380V/50Hz becomes a stationary cabinet in a 220V/60Hz workshop.
I have watched containers arrive at Southeast Asian ports with edge banders wired for the wrong grid standard. The DW802 is compact, easy to ship, and fast to set up — none of that matters if the motor contactors chatter or the PLC refuses to boot on local power. Confirming voltage, frequency, and plug type before production begins eliminates weeks of on-site rewiring and transformer rental [NEED_CITE: voltage and frequency standards by export market].
Ready Stock Means Your Workshop Keeps Moving
When a cabinet shop commits to a delivery date with a contractor, waiting eight weeks for a built-to-order edge bander is not an option. The DW802 automatic edge banding machine in stock configuration covers the core sealing sequence — gluing, trimming, polishing, and automatic head-and-tail cutting — in a single pass. Dispatch lead times stay short because the machine leaves the floor fully assembled and function-tested, not flat-packed for reassembly at your site.
One Compact Frame, Five Integrated Stations
Small workshops rarely have the floor space for separate gluing, trimming, and polishing stations. The DW802 packs all five functions into a 130 × 60 × 95 cm footprint that fits through a standard single-leaf door. The 4000 ml glue pot holds enough adhesive for continuous multi-panel runs, so the operator is not stopping to refill between every sheet. This matters when you are banding cabinet sides, shelves, and kick-boards in a single morning session [NEED_CITE: typical glue consumption rates for small edge banders].
Reading the Spec Sheet Against Your Actual Panels
The 800W × 2 trimming motors provide the torque needed to cleanly shear 3 mm PVC banding without leaving chatter marks on the panel face. Two 180W polishing motors follow immediately, buffing the trimmed edge to a finish that does not require secondary hand-work. The 0.3–3 mm banding thickness range covers melamine paper, PVC, ABS, and thin veneer — materials that a smaller motor set would struggle to trim cleanly. Vacuum at 1200W pulls dust and offcuts away from the glue roller, keeping the bond line consistent across a production run. Air pressure between 0.4 and 0.8 MPa drives the pneumatic cylinders that position the banding and actuate the cutters, so a stable compressor supply is essential for repeatable edge quality.
What Happens When Configuration Is Skipped
Ordering an automatic edge banding machine in stock without verifying local electrical standards leads to more than inconvenience. Motor windings overheat on the wrong frequency, PLC firmware throws errors on mismatched phase sequences, and contactor coils burn out within the first hour of operation [NEED_CITE: CE machinery directive requirements for industrial equipment]. I have seen workshops lose three weeks of production while waiting for replacement parts that should never have been needed. The cost of a transformer, rewiring labor, and idle operators adds up fast.
Why Buyers Source This Model Here
- In-house assembly with four-stage QC means the DW802 is tested under load before packing, not just powered on for a photo.
- Voltage, plug type, and control-panel language are locked in at order confirmation, so the machine arrives ready to run.
- Compact 135 kg weight and fully assembled state allow single-person unloading with a standard pallet jack.
- Engineer-led configuration review within 24 hours ensures the spec sheet matches your workshop’s panel sizes and board types.
- Factory test records and pre-shipment photographs are provided so you can verify function before the container is sealed.
Documentation & Verification
- CE declaration of conformity specific to the DW802 automatic edge banding machine
- Machine specification sheet listing confirmed voltage, frequency, and plug type
- Electrical schematic with circuit-breaker ratings matched to local supply
- Factory test record on your panel thickness range before dispatch
- Operation and maintenance manual in the agreed language shipped inside the crate
- Spare parts list with reorder codes for trimmer blades, polishing wheels, and glue-pot seals
Installation, Commissioning & Support
- The 4200W total load requires a dedicated circuit rated for at least 25A at the confirmed voltage.
- Overall dimensions of 130 × 60 × 95 cm fit a standard 120 × 80 cm pallet with clearance for forklift forks.
- Machine ships fully assembled; only dust-hood and material-support extensions need bolting on arrival.
- PLC language and feed-speed parameters are preset at the factory; operator reviews them on first power-up.
- Trimmer and polisher motor bearings should be inspected after the first 200 operating hours.
- Pneumatic filter-regulator on the 0.4–0.8 MPa air line must be drained weekly to protect cylinders.
What to Share With Your Inquiry
To match the right DW802 configuration to your workshop, provide your standard panel dimensions and the board materials you run most often. Confirm your local voltage, frequency, and the plug standard your electricians use. Let us know the control-panel language your operators need, and whether you plan to run the machine on single-shift or double-shift schedules.
Frequently Asked Questions
Q: Is this model in stock and what is the dispatch lead time?
A: The DW802 is held in ready-stock configuration with standard functions pre-assembled. Once voltage, plug type, and control-panel language are confirmed, the machine undergoes a final function test and ships within days rather than weeks. Single-unit orders are accepted without minimum-quantity requirements.
Q: Which voltage, plug type, and panel language will my machine ship with?
A: These three items are confirmed in writing before production. Available voltages include 220V and 380V, with plug options for EU, USA, AU, and UK markets. The PLC control panel can be set to Chinese, English, Spanish, French, or other languages your operators require.
Q: What is the minimum order — can I buy a single unit?
A: Single-unit orders are standard for the DW802. There is no minimum batch requirement. Each machine ships with its own documentation set, spare parts kit, and packing photographs for customs clearance.
Q: How do I verify edge banding quality before committing?
A: Request a factory test record showing the DW802 running on your specified board material and banding thickness. Pre-shipment photographs document the machine under load. You may also arrange a factory visit to observe a live sealing test on sample panels.
Q: What spare parts are included, and how do I reorder consumables?
A: Each DW802 ships with a spare parts list covering trimmer blades, polishing wheels, glue-pot seals, and pneumatic fittings. Reorder codes are printed on the list so you can request replacements directly by part number without describing components from memory.
