Description
Voltage-locked stock — every DW802 in our warehouse ships with your country’s exact voltage, frequency, and plug type verified before the crate closes.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | DW802 |
| Product Type | Automatic Edge Banding Machine |
| Total Power | 4200W |
| Voltage & Frequency | 220V / 380V / customizable (50Hz/60Hz to be confirmed per market) |
| Edge Banding Thickness Range | 0.3–3 mm |
| Edge Banding Height Range | 0–50 mm |
| Minimum Sheet Length | 25 cm |
| Minimum Sheet Width | 10 cm |
| Glue Pot Capacity | 4000 ml |
| Air Source Pressure | 0.4–0.8 MPa |
| Trimming Power | 800W × 2 |
| Polishing Power | 180W × 2 |
| Vacuum Power | 1200W |
| Edge Feed Power | 140W |
| Transmission Power | 140W |
| Product Dimensions (L×W×H) | 130 × 60 × 95 cm |
| Product Weight | 135 kg |
| Conveyor Belt Material | Silica gel |
| Control Panel Languages | Chinese, English standard; Spanish and other languages customizable |
| Plug Options | EU, USA, AU, UK |
| Assembly State | Fully assembled |
| Certification | CE, ISO 9001 |
| Feed Speed | (basis to be confirmed) |
| Panel Thickness Range | (basis to be confirmed) |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom cabinet door edging | MDF and particleboard panels with PVC or melamine edge banding |
| Home decoration built-in furniture | Plywood and ecological board with veneer or ABS banding |
| Small-batch office furniture | Particleboard shelving and desk tops requiring clean trimmed edges |
| Joinery workshop transition from manual to machine | Solid wood panels up to the machine’s height range |
| Sample room and prototyping | Short runs on mixed substrates with frequent banding changes |
Why the Voltage Question Should Come Before the Price
Ordering an automatic edge banding machine in stock without locking down electrical compatibility is the fastest way to lose three weeks on the shop floor.
I once watched a customer in Mexico stand in front of a crated edge bander that would not power on. The quote had been confirmed, the shipping paid, and the machine delivered — all without anyone asking whether the workshop ran on 220V/60Hz or something else entirely. An electrician spent three weeks rewiring the local panel before the first board could be edged. The machine was fine. The paperwork was not [NEED_CITE: voltage and frequency standards by export market].
That experience reshaped how I look at every dispatch. When you browse an automatic edge banding machine in stock, the first thing we confirm is not the price — it is your local supply voltage, frequency, and the plug your operators will actually plug in.
Stock That Ships on Your Electrical Terms
The DW802 sits in the warehouse fully assembled, which means there is no build delay once your specs are locked. What does take time is getting the electrical configuration right. We match the motor winding, transformer tap, and control circuit to your confirmed voltage and frequency before the machine is crated. For markets running 220V/60Hz — common across parts of Latin America and the Philippines — the motor and contactor ratings differ from the 380V/50Hz units bound for Europe and Southeast Asia. An automatic edge banding machine in stock is only fast if it actually runs when it arrives.
Dispatch Speed Without the Guesswork
Ready-stock does not mean one-size-fits-all. Each DW802 pulled from inventory goes through a pre-shipment electrical verification: the voltage setting is measured under load, the plug is swapped to your specified type, and the control panel language is set before the operator manual is printed. This adds a short window to the dispatch timeline but removes the weeks of downtime that a voltage mismatch causes on site. The goal is simple — the machine you order is the machine you plug in and run [NEED_CITE: CE machinery directive requirements for industrial equipment].
What the Numbers Mean on the Shop Floor
The 4200W total power draw tells you what the machine needs from your workshop’s electrical panel. At 220V, that translates to a dedicated circuit rated for the inrush current when the trimming and vacuum motors start together. The 0.4–0.8 MPa air supply requirement means you need a compressor capable of holding steady pressure through the pneumatic cylinders that control the pressure beam and trimming units — a drop below 0.4 MPa will show up as inconsistent edge contact on thicker banding. The 4000 ml glue pot is sized to keep adhesive at temperature through extended runs without constant refilling, which matters when you are edging a batch of cabinet sides back to back. The silica gel conveyor belt grips coated and raw panels without leaving marks, and the 130 × 60 × 95 cm footprint lets you place this machine in a small workshop where floor space decides what else fits on the line.
When a Quick Ship Turns Into a Long Stop
A machine that arrives with the wrong voltage does not just sit idle. It occupies floor space, blocks the workflow you planned around it, and forces your electrician to improvise solutions that may not meet local code. Control panels configured in a language your operators cannot read add another layer of delay — every button press becomes a guess, and commissioning stalls until someone translates the interface. These are not engineering failures. They are ordering failures, and they are entirely avoidable [NEED_CITE: industrial equipment commissioning delays from specification mismatches].
Why Buyers Source This Machine Through Our Stock Channel
Every DW802 that ships from stock carries a factory test record showing it ran under load at the confirmed voltage before crating. The voltage customization is not an afterthought — it is built into the stock workflow, so the machine you order matches the 220V, 380V, or other specification your workshop requires. Plug options covering EU, USA, AU, and UK standards are swapped in the warehouse, not on your floor. The four-stage quality check covers incoming components, in-process assembly, finished product testing, and pre-shipment verification, giving you documented proof of what was tested. An engineer reviews your production requirement and confirms the configuration within a short turnaround, so you are not guessing which options you need.
Documentation & Verification
- Electrical schematic showing confirmed voltage and frequency for your specific DW802 unit
- Factory test record documenting edge sealing performance on your panel material before dispatch
- Operation and maintenance manual printed in your agreed language, English, Spanish, or other
- Spare parts list with part numbers matching your machine’s configuration for straightforward reordering
- CE declaration of conformity and ISO 9001 certificate included with shipping documents
- Packing photographs taken at crating for condition verification on arrival
Installation, Commissioning & Support
- Requires a dedicated circuit matching the confirmed 4200W total draw and local voltage specification
- Air compressor must sustain 0.4–0.8 MPa at the machine inlet for reliable pneumatic operation
- Ships fully assembled at 135 kg — two people can position it on a level workshop floor
- First-run glue temperature and trimming depth set during commissioning guidance call
- Silica gel conveyor belt inspection and tension check included in the monthly maintenance schedule
- Spare trimming cutters and polishing wheels ship with the unit for immediate replacement availability
Tell Us What You Need Before You Order
Send us your workshop voltage, frequency, and the plug type your electricians use. Let us know which panel materials you edge most often — MDF, particleboard, plywood, or solid wood — and the typical board dimensions you run. If your operators need a specific control panel language, tell us upfront so the interface is ready on day one.
Frequently Asked Questions
Q: What is the dispatch lead time for stocked DW802 units?
A: Stocked DW802 machines are fully assembled and available for prompt dispatch. The timeline includes a short window for voltage confirmation, plug swap, control panel language setup, and pre-shipment electrical testing. Once these are locked, the machine is crated and handed to your chosen freight forwarder. Exact dates depend on the configuration work required for your market.
Q: Can I order a single unit, and what shipping options are available?
A: Yes, the DW802 is available as a single-unit order from stock. The machine ships in a crate sized for its 130 × 60 × 95 cm footprint and 135 kg weight. We support LCL and FCL sea freight as well as air freight for urgent requirements. Shipping method and transit time depend on your destination port and the carrier you select.
Q: How do I confirm the correct voltage, frequency, and plug type for my country?
A: Tell us your country and the electrical standard your workshop operates on. We cross-reference the supply voltage and frequency, confirm the plug type — EU, USA, AU, or UK — and document the configuration in the electrical schematic that ships with your machine. If your facility runs a non-standard supply, we configure the unit accordingly before dispatch.
Q: What control panel languages are available, and can I get English-only?
A: Chinese and English are standard on every DW802. Spanish and other languages are customizable before shipment. If you need English-only or a specific language for your operators, confirm this during the order process so the control interface is set and the matching operation manual is printed before the machine leaves the warehouse.
Q: What spare parts ship with the machine, and how do I order replacements?
A: Each DW802 ships with a spare parts list matched to your unit’s configuration, along with commonly replaced consumables. When you need replacements, reference the part numbers in your manual and send us a request. We stock parts for the trimming, polishing, and conveyor assemblies and can dispatch them to your location.
