Description
Ready Stock Dispatch — Model 802 automatic edge banding machine held in inventory for workshops that cannot afford multi-week lead times, with 220V specification confirmed before every shipment.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | 802 |
| Product Type | Automatic Edge Banding Machine |
| Edge Type | Straight line |
| Rated Voltage | 220V |
| Rated Power | 4 kW |
| Trimming Power | 800W × 2 |
| Polishing Power | 180W × 2 |
| Suction Power | 1200W |
| Heating Power | 1000W (5–10 min warm-up) |
| Feed Speed | 0–10 m/min |
| Conveyor Belt Speed | 0–10 m/min |
| Glue Pot Capacity | 4000 ml |
| Strip Thickness Range | 0.5–2.5 mm |
| Sheet Thickness Range | 10–50 mm |
| Rated Air Pressure | 0.4–0.6 MPa |
| Conveyor Belt Material | Silicone |
| Pressure Beam | One-piece integrated, double rows of pressure wheels |
| Belt Breaking Method | Pneumatically controlled |
| Extension Support | Extendable fluent strips for large plates |
| Control Panel | Digital display of glue pot temperature, independent switches |
| Overall Dimensions | 130 × 65 × 75 cm |
| Machine Weight | 150 kg |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom cabinet door edge banding | MDF and particleboard with PVC or melamine strips 0.5–2.5 mm |
| Small-batch plywood shelving production | Plywood panels 10–50 mm thick, straight-edge veneer or PVC |
| Joinery workshop first automation | Wood-based panels transitioning from manual to machine-applied edge banding |
| Panel processing auxiliary line | Straight-line edge finishing on pre-cut MDF and particleboard components |
Why the Voltage Question Must Come Before the Order
A 220V machine shipped to a 380V workshop is a 150 kg paperweight until an electrician rewires the feed.
I have watched commissioning stall for days because the voltage on the nameplate did not match the panel in the wall. One cabinet factory in the Gulf region took delivery of a batch of edge banders only to find the three-phase supply they quoted was actually single-phase at the machine location. The Automatic Edge Banding Machine in stock here ships with a documented 220V single-phase rating, verified against your workshop supply before dispatch [NEED_CITE: voltage and frequency standards by export market]. When the machine arrives and the plug does not match, every day of delay is a day of lost production and operator frustration.
Fast Dispatch for Workshops That Cannot Wait
When a small cabinet maker lands an urgent contract or a joinery shop needs to replace a failed machine, lead time matters more than catalog depth. This Automatic Edge Banding Machine in stock is held for immediate dispatch, meaning your order moves from confirmation to crating within a short window rather than entering a production queue. The 130 × 65 × 75 cm footprint fits through standard workshop doors and onto a flat floor without special foundations.
Ordering Simplicity From Inquiry to Loading Bay
The purchasing path for stocked equipment should not require weeks of back-and-forth engineering negotiation. You specify your panel thickness range and confirm your local voltage, and the configuration is locked. The Model 802 arrives with its silicone conveyor belt, integrated dust extraction, and pneumatic belt breaking already assembled and tested. Single-unit orders are standard — there is no container-load minimum forcing you to stockpile machines you did not plan for [NEED_CITE: typical procurement patterns for small workshop machinery imports].
Reading the Numbers That Actually Matter on the Shop Floor
The 4000 ml glue pot capacity means fewer refill interruptions during a continuous run of cabinet panels, keeping the operator at the feed end rather than walking back to the glue station. The 0.5–2.5 mm strip thickness range covers standard PVC, melamine, and thin veneer edging used in furniture production, though it does not extend to the thicker solid wood strips some specialist shops require. Feed speed up to 10 m/min is adequate for batch production in a small-to-medium workshop, where panel volumes do not demand the continuous-feed throughput of a large factory line. The double 800W trimming motors with upper and lower cutters handle the excess strip material cleanly at both edges of a 10–50 mm panel, reducing the need for secondary hand-trimming that slows downstream assembly.
What Happens When the Specification Is Assumed, Not Confirmed
A buyer who skips sending actual edge banding strip samples before ordering often discovers at commissioning that the machine cannot hold the strip flat against the panel edge, leaving visible glue lines that fail the customer’s quality check. I have seen PVC strips that measured 0.8 mm thicker than the supplier’s sample, causing the trimming cutters to leave an uneven finish across every panel in the batch [NEED_CITE: edge banding adhesion failure caused by material thickness mismatch]. When the strip and panel combination is not tested before the machine ships, the first production run becomes an expensive troubleshooting exercise.
Why Procurement Through This Channel Reduces Arrival Risk
Stocked models ship with voltage already matched to your declared supply, removing the most common cause of commissioning failure in export markets. A pre-shipment test record documents actual edge banding output on panel thicknesses within your specified range, so you see what the machine produces before it leaves the factory. The one-piece integrated pressure beam with double rows of pressure wheels is standard on this model, not an optional upgrade, ensuring consistent panel clamping from the first unit shipped. Operation and maintenance documentation arrives in your agreed language, meaning your operator can read the setup procedure on day one rather than guessing at unlabeled controls. A one-year warranty covers the machine from arrival, with a spare parts list included so you know what to reorder and when.
Documentation & Verification
- CE declaration of conformity for the Model 802 confirming machinery directive compliance
- Factory test record showing edge banding results on your specified panel thickness and strip type
- Electrical schematic with 220V wiring diagram for your local electrician’s reference
- Operation manual written in your chosen language with illustrated setup procedures
- Spare parts list identifying wear components and their replacement intervals
Installation, Commissioning & Support
- Place the 150 kg unit on a level floor; no anchor bolts required at this weight class
- Connect to a dedicated 220V single-phase circuit rated for at least 4 kW continuous draw
- Supply clean compressed air at 0.4–0.6 MPa to the pneumatic belt-breaking cylinder
- Allow 5–10 minutes for the 1000W heating element to bring the glue pot to working temperature
- Calibrate feed speed and trimming depth using included test panels before starting production
- Inspect the silicone conveyor belt surface weekly for glue buildup and strip residue
What to Provide With Your Inquiry
Send the actual PVC, melamine, or veneer strip you plan to run, along with a sample of your thickest and thinnest panel material, so we can test edge adhesion and trimming quality before dispatch. Confirm your workshop’s single-phase voltage and available circuit capacity to ensure the 4 kW rated power matches your electrical panel. Let us know your typical daily panel count so we can verify the 0–10 m/min feed speed aligns with your production target.
Frequently Asked Questions
Q: Is Model 802 in stock and how quickly can it ship?
A: This automatic edge banding machine is held in ready stock for dispatch. Once your voltage supply is confirmed and edge banding strip samples are approved, the unit moves to pre-shipment testing and crating. Exact dispatch timing depends on the current stock position and your destination port, but it avoids the production-queue lead time of a built-to-order machine.
Q: Does 220V match my workshop, and can other voltages be arranged?
A: The stocked Model 802 is rated at 220V single-phase, suitable for markets using this standard. If your workshop operates on a different voltage or three-phase supply, confirm this before ordering. Alternative voltage configurations may be available through the factory on a built-to-order basis, though this changes the dispatch timeline from stock availability to production scheduling.
Q: What panel and strip thickness range does this machine handle?
A: The Model 802 processes sheet material from 10 to 50 mm thick and applies edge banding strips from 0.5 to 2.5 mm thick in straight-line configuration. This covers standard MDF, particleboard, and plywood panels used in cabinet and furniture production with PVC, melamine, or thin veneer edging materials.
Q: Can I order a single unit, or is there a minimum quantity?
A: Single-unit orders are accepted on this stocked model. There is no container-load minimum or batch-order requirement. This makes the Model 802 suitable for a workshop adding its first automated edge bander or replacing a single machine on an existing line.
Q: What spare parts come with the machine and how do I get replacements?
A: A spare parts list ships with the machine identifying wear components such as trimming cutters, polishing wheels, and conveyor belt sections. The included documentation specifies replacement intervals. Replacements can be ordered directly from the factory and shipped to your location, typically by express courier for small parts.
