Description
Voltage Confirmed Before Crating — every 802 unit is matched to your site power on the electrical confirmation sheet before it leaves the factory floor, eliminating the three-week electrical cabinet rebuild that once stalled an entire container shipment.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | 802 |
| Product Type | Automatic Edge Banding Machine |
| Edge Type | Straight line |
| Rated Voltage | 220V |
| Rated Power | 4 kW |
| Trimming Power | 800 W × 2 motors |
| Polishing Power | 180 W × 2 motors |
| Suction Power | 1200 W |
| Heating Power | 1000 W (5–10 min heat-up) |
| Glue Pot Capacity | 4000 ml |
| Strip Thickness Range | 0.5–2.5 mm |
| Sheet Thickness Range | 10–50 mm |
| Feed Speed | 0–10 m/min |
| Conveyor Belt Speed | 0–10 m/min |
| Rated Air Pressure | 0.4–0.6 MPa |
| Overall Dimensions | 130 × 65 × 75 cm |
| Machine Weight | 150 kg |
| Control System | Digital display with independent switches |
| Pressure Beam | One-piece integrated, double rows of pressure wheels |
| Conveyor Belt Material | Silicone |
| Belt Breaking Method | Pneumatically controlled |
| Trimming Motors | Double high-speed |
| Polishing Stations | Upper and lower (2 motors) |
| Support Extension | Extendable fluent strips for large plates |
| Warranty | 1 year |
Application Suitability
| Application | Material or Output |
|---|---|
| Cabinet door edge finishing | MDF and plywood with PVC or melamine banding |
| Custom furniture panel edging | Particleboard with 0.5–2.5 mm PVC strip |
| Small-batch joinery production | Solid wood panels with wood veneer edge banding |
| Shelving and carcass edging | Melamine-faced chipboard up to 50 mm thickness |
| Workshop-scale residential projects | Straight-line panels with ABS or melamine strips |
Why the Voltage Question Should Come Before the Price on an Automatic Edge Banding Machine in stock
A machine that cannot power on is not a machine — it is a 150 kg crate sitting on your shop floor.
I learned this the hard way when a fully automatic edge bander arrived in the Middle East wired for a voltage that did not match the local supply. The crew waited three weeks for a replacement electrical cabinet while the ship date on the rest of the order slipped. Since then, every single unit I schedule for dispatch goes through a voltage and frequency confirmation step before it is crated [NEED_CITE: voltage and frequency standards by export market]. When you source an Automatic Edge Banding Machine in stock, the first question on the checklist should always be your site voltage, not the unit price.
Dispatch Timing That Matches Your Project Schedule
Small workshops rarely have the luxury of waiting six to eight weeks for a production run. The 802 is held in stock so that a single-unit order can be dispatched within a typical short lead time once the electrical confirmation sheet is signed off. This matters when a cabinet maker lands a residential kitchen contract and needs edge finishing capacity on the floor within the same month the deposit clears.
Single-Unit Orders Without Minimum-Order Friction
Many factories will only talk to you if you are buying a container load. The 802 Automatic Edge Banding Machine in stock is available as a single unit, which suits a joinery workshop transitioning from hand-held trimmers to its first automated station. You order one machine, confirm the voltage, and it ships — no bundled line requirement, no filler machines to hit a minimum [NEED_CITE: typical MOQ expectations for woodworking machinery imports].
Reading the Specs That Actually Matter at This Scale
The 4000 ml glue pot is large enough to sustain a continuous run through a batch of cabinet sides without stopping to refill, which keeps the glue temperature stable and the bond line consistent. The one-piece integrated pressure beam with double-row silicone pressure wheels holds the panel flat against the conveyor without leaving marks on melamine surfaces. Feed speed ranges from 0 to 10 m/min, giving the operator room to slow down on thick veneer and speed up on standard PVC edging. The pneumatically controlled belt breaking method removes the manual effort from end trimming, reducing operator fatigue across a full shift. Board thickness capacity runs from 10 mm to 50 mm, covering everything from thin shelving to heavy worktop cores [NEED_CITE: common panel thickness ranges in custom furniture production].
What Happens When You Skip the Voltage Confirmation Step
The consequences are not limited to a dead machine. A 220V motor fed with 380V will burn out the winding within minutes, and the damage is not covered under standard warranty because it is classified as a site-supply fault. Even a frequency mismatch between 50 Hz and 60 Hz shifts the motor RPM, which alters the feed speed and trimming cutter speed, producing an edge finish that looks wrong and is hard to diagnose. The operator blames the machine, the supplier blames the power supply, and the project stalls [NEED_CITE: effects of frequency mismatch on AC induction motors in industrial equipment].
Why Buyers Source This Model Through This Channel
The 802 sits in a product family that runs from entry-level to full-function pre-milling configurations, so a workshop that outgrows this unit can move to the next model without changing supplier. Voltage customization from 110V to 440V is available as standard, and the electrical confirmation is documented before dispatch. A four-stage quality check covers incoming material, in-process assembly, finished product, and pre-shipment verification. An engineer reviews your processing requirements and returns a formal configuration recommendation, typically within one working day. Factory visits are open if you want to see the machine run your own panel material before committing.
Documentation & Verification
- CE declaration of conformity matched to the 802 model and its rated voltage
- Machine specification sheet listing every motor rating and dimensional figure
- Electrical schematic and signed voltage confirmation for your site supply
- Factory test record showing edge finish on your specified panel thickness
- Operation and maintenance manual in the language your operator reads
- Spare parts list covering trimming blades, polishing wheels, and conveyor belt sections
Installation, Commissioning & Support
- Requires a dedicated 220V circuit rated for at least 4 kW continuous draw
- Air supply must deliver 0.4–0.6 MPa clean dry air to the pneumatic trimming system
- 130 × 65 cm footprint fits through a standard workshop roller door for placement
- Digital display and independent switches allow first-run parameter setup without a laptop
- Extendable fluent strip supports must be leveled to the conveyor height before running large plates
- Silicone conveyor belt sections and trimming blades stocked as consumable spare parts
Before You Request a Quote
Share your panel material, thickness range, and the edge banding strip type you run most often. Confirm your workshop voltage and frequency so the electrical configuration is locked before production. Let us know whether you need the operation manual in a specific language and whether you require a pre-shipment test video on your own board stock.
Frequently Asked Questions
Q: Is this model in stock and what is the dispatch lead time for a single unit?
A: The 802 Automatic Edge Banding Machine in stock is available for single-unit orders. Once you confirm your site voltage and sign off the electrical confirmation sheet, the unit goes through a pre-shipment test and is prepared for dispatch. Typical lead time from confirmation to crating is short because the machine is already assembled and does not require a production run.
Q: Can the voltage be customized if my workshop is not on 220V?
A: Yes. Voltage configuration from 110V to 440V is available across the product family. The 802 is stocked at 220V, but if your site runs on a different supply, we reconfigure the motor, heating element, and control circuit before dispatch. The revised electrical schematic is included in the documentation package.
Q: What edge banding materials does the 802 handle?
A: The machine processes PVC, ABS, melamine, and wood veneer strips from 0.5 mm to 2.5 mm thick. The 4000 ml glue pot maintains stable temperature across different adhesives, and the upper and lower polishing motors deliver a clean finish on both glossy PVC and matte melamine surfaces.
Q: How do I arrange door-to-door shipping and customs clearance?
A: We support shipment with full customs documentation including packing photographs, commercial invoice, and packing list. Shipping can be quoted to your nearest port or arranged as door-to-door delivery depending on your location. Confirm your delivery address early so the crate dimensions and weight are matched to the correct freight class.
Q: What spare parts are included and how do I order replacements?
A: The standard spare parts list includes trimming blades, polishing wheels, and conveyor belt sections matched to the 802. A detailed parts diagram is included in the documentation package. Replacement orders are fulfilled from stock and can ship with your next machine order or as a standalone parcel.
