Description
Ready-Stock Availability — ZDS368A units sitting in the warehouse run a full test cycle on your specified edge material before crating, so the machine you receive matches the configuration you ordered.
Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | Automatic Edge Banding Machine |
| Model | ZDS368A |
| Main Functions | Gluing, End Trimming, Rough Trimming, Fine Trimming, Scraping, Buffing |
| Panel Thickness Range | 10–55 mm |
| Edge Thickness Range | 0.3–3.5 mm |
| Conveyor Belt Speed | 18 m/min |
| Min. Panel Width | 40 mm |
| Min. Panel Length | 60 mm |
| Rated Power | 8.5 kW |
| Working Pressure | 0.6–0.8 MPa |
| Voltage | 380V / 3-Phase (50Hz or 60Hz to be confirmed at order) |
| Control System | Taiwan Delta PLC with Touch Screen |
| Pneumatic Components | Taiwan AirTAC cylinders and safety valve |
| Electrical Components | Delixi/Chint breakers and contactors, Japanese Omron travel switches |
| Inverter | Switzerland JORAL |
| Edge Banding Materials | PVC, Veneer |
| Overall Dimensions | 4200 × 1000 × 1500 mm |
| Net Weight | 1500 kg |
| Warranty | 1 Year |
Application Suitability
| Application | Material or Output |
|---|---|
| Cabinet door and carcass edge banding | MDF and particleboard with PVC edge strips |
| Wardrobe panel finishing | Plywood panels with veneer edge banding up to 3.5 mm |
| Learning desk and office furniture production | Laminated board with standard PVC profiles |
| Small-batch custom furniture runs | Mixed panel materials in a single shift |
| Joinery workshop first-machine automation | Replacing manual edge application on sheet stock |
Why the Voltage Question Comes Before the Price on an Automatic Edge Banding Machine in Stock
Confirming your site voltage and frequency before dispatch prevents a machine that arrives dead on the floor.
I spent years on the assembly floor watching machines get crated and shipped without anyone double-checking whether the buyer’s workshop ran 50Hz or 60Hz. A 380V motor wired for the wrong frequency overheats within the first week, and the damage shows up as burned windings that no warranty covers because the spec sheet was never verified [NEED_CITE: voltage and frequency standards by export market]. The ZDS368A ships in ready-stock configuration, but the motor winding and transformer setup still needs to match your local supply. An Automatic Edge Banding Machine in stock means fast dispatch, not skip-the-checks dispatch.
Stocked Means Tested on Your Material Before It Leaves
When we say this Automatic Edge Banding Machine in stock is ready to go, that readiness includes a dry-run on your actual edge banding material. PVC at 0.4 mm behaves differently through the trimming stations than 2 mm veneer, and the glue pot temperature, pressure roller tension, and feed speed all need adjustment before the machine leaves the floor. We run sample panels through all six stations, document the settings, and ship the machine with those parameters saved in the Delta PLC so your operator starts from a known baseline instead of guessing on day one.
Fast Dispatch Without the Usual Blind Spots
The lead time advantage of buying from stocked inventory disappears quickly if the machine arrives with the wrong plug, an unreadable control panel, or pneumatic fittings that do not match your compressor output [NEED_CITE: common commissioning delays in imported woodworking machinery]. Every ZDS368A order goes through a pre-dispatch checklist that covers electrical configuration, HMI language setting, air supply compatibility, and a full set of packing photographs you receive before the crate leaves the warehouse. You see exactly what is inside before it reaches your dock.
Reading the Specs That Actually Matter for Edge Quality
The six-station sequence on the ZDS368A — gluing through end trimming, rough trimming, fine trimming, scraping, and buffing — means each cut pass removes a smaller amount of material, which is how you get a clean edge on MDF without chipping the substrate face. Panel thickness range of 10–55 mm covers everything from thin drawer sides to thick shelving stock. The 18 m/min conveyor speed holds steady through the trimming stations because the JORAL inverter manages motor load as panel weight varies. For veneer edge banding, the fine trimming station needs slower feed and lower cutter pressure than PVC, which is exactly why the Delta PLC lets you store separate recipes for each material type so operators do not re-enter values manually between jobs.
What Happens When You Skip the Configuration Step
Buying a stocked edge bander without confirming material type, local voltage, and control language creates problems that show up after the machine is bolted to your floor. The glue pot runs too hot for thin veneer and scorches the backing. The operator cannot read the fault codes on the HMI and calls someone who can, losing a full shift. The pneumatic safety valve trips because your shop compressor delivers air at a different pressure than the AirTAC cylinders expect [NEED_CITE: pneumatic supply mismatches in imported machinery installations]. These are not defects — they are configuration gaps that a pre-dispatch test cycle catches.
Why Buyers Source This Machine From Here
Stocked inventory means the ZDS368A is physically in the warehouse, not scheduled for a production slot weeks out. Every unit goes through a four-stage quality check covering incoming component inspection, in-process assembly verification, finished-product testing, and pre-shipment validation with documented results. Voltage, HMI language, and plug configuration are confirmed at order and verified again before crating. The Delta PLC stores multiple material recipes, so a workshop running both PVC and veneer does not need manual recalibration between jobs. Factory test records ship with the machine, giving your team the baseline settings for the exact panel and edge combination you specified.
Documentation & Verification
- Factory test record showing six-station output on your specified panel thickness and edge material
- Electrical schematic confirming motor winding and transformer match your site voltage and frequency
- Operation manual in your chosen language covering Delta PLC menu navigation and fault code lookup
- Pneumatic circuit diagram with AirTAC cylinder specifications for local compressor matching
- Packing photographs of your specific unit taken before crating for visual condition reference
- Customs documentation package with HS code and origin certificate for import clearance
Installation, Commissioning & Support
- 4200 mm length requires a clear floor span with level concrete and anchor points for the 1500 kg frame
- 8.5 kW rated power needs a dedicated 380V three-phase circuit with correctly rated breaker and contactor
- Machine ships fully assembled; position, connect power and air supply at 0.6–0.8 MPa, and run calibration panels
- Delta PLC touch screen stores material-specific recipes so first-day setup uses pre-loaded trimming and glue parameters
- Omron travel switches and AirTAC pneumatic valves are regionally available standard components for field replacement
What to Include With Your Inquiry
Send the panel material and thickness you run most often, the edge banding type and thickness range, and your workshop voltage and frequency so we can confirm the ZDS368A configuration before quoting dispatch timing. If you run both PVC and veneer, let us know the split so we can set up PLC recipes for each. We can also arrange a sample panel test on stocked inventory before you commit.
Frequently Asked Questions
Q: Is this ZDS368A edge bander actually in stock, and what is the dispatch lead time?
A: The ZDS368A is held in warehouse stock. Dispatch timing depends on the pre-shipment testing cycle required for your specific edge material and voltage configuration. Once the factory test is complete and packing photographs are approved, the machine is released for crating and handover to your freight forwarder within a matter of days.
Q: Can you confirm the machine voltage and plug match my country standard before shipping?
A: Yes. Voltage and frequency are confirmed at order. The motor winding, transformer, and plug are verified against your site supply specification before the machine leaves the warehouse. The electrical schematic included in the documentation package reflects the exact configuration shipped.
Q: What control panel language options are available, and can I specify before order?
A: The Delta PLC touch screen supports multiple language options. You specify your preferred language at order, and the HMI is configured and tested in that language before dispatch so your operator can navigate menus and fault codes from the first shift.
Q: What spare parts ship with the machine, and how fast can consumables be reordered?
A: Each ZDS368A ships with a spare parts list covering wear items for the trimming cutters, scraping blades, and buffing wheels. AirTAC pneumatic seals, Omron travel switches, and Delixi contactors are standard industrial components available through regional suppliers for fast local sourcing.
Q: Do you provide shipping and customs documentation support to my destination?
A: Every order includes a full customs documentation package with HS code, origin certificate, and packing list. We provide packing photographs before crating and coordinate with your nominated freight forwarder or arrange shipping to your destination port upon request.
