Description
Stocked and Configured — DW3000 fully automatic 45 degree edge banding machine held in ready inventory with voltage, plug, and control language verified before dispatch to prevent on-site commissioning delays.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | DW3000 |
| Product Type | Fully Automatic 45 Degree Oblique Straight Edge Banding Machine |
| Total Power | 11 kW |
| Feed Speed | 0–12 m/min |
| Edge Banding Thickness Range | 0.3–3 mm |
| Edge Banding Height Range | 0–50 mm |
| Minimum Sheet Length | 30 cm |
| Minimum Sheet Width | 15 cm |
| Pre-milled Motor | 2.2 kW |
| Heating Power | 2.2 kW × 2 (double heat gun) |
| Trimming Power | 2.2 kW × 2 (3 spindle motors total) |
| Polishing Power | 0.4 kW × 2 |
| Vacuum Power | 550 W |
| Glue Pot Capacity | 4000 ml |
| Oblique Pressure Wheels | 8 groups, adjustable 30–90° |
| Air Source Pressure | 0.5–0.7 MPa |
| Voltage Options | 380V / 415V (confirm frequency and phase for destination) |
| Plug Options | EU, USA, AU, UK |
| Control Language Options | Chinese and English standard; Spanish and others customizable |
| Product Size (L×W×H) | 299 × 65 × 130 cm |
| Product Weight | 430 kg |
| Assembly State | Fully assembled |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom cabinet door edge banding | MDF and plywood with PVC or ABS banding |
| Wardrobe and shelving panel finishing | Particleboard with melamine edge banding |
| Oblique and straight edge processing in one pass | Bevel-cut furniture components at 30–90° |
| Small-to-medium workshop production runs | Solid wood panels with veneer edge banding |
Why the Voltage Question Should Come Before the Price
A 45 degree edge banding machine in stock is only useful if it powers on the day it arrives.
I once watched a container sit at a Southeast Asian port for three weeks because the buyer quoted 380V but the workshop ran on 415V at 60Hz. The transformer swap cost more than the shipping. Every DW3000 leaving our floor gets its voltage, frequency, and plug type confirmed in writing before the crate closes. The 45 degree edge banding machine in stock you see today ships only after we match your facility’s actual electrical supply [NEED_CITE: voltage and frequency standards by export market].
Dispatch Timing When Inventory Is Already Built
The DW3000 sits fully assembled, not flat-packed or waiting on a production slot. When your workshop needs a 45 degree edge banding machine in stock, the conversation starts with your electrical specification and destination port, not a factory lead time. We pull the unit, run the pre-shipment test on your specified panel thickness, and quote the shipping options in the same cycle. Single-unit orders move through the same process as container loads.
Oblique and Straight Edges Without Switching Machines
The 8-group oblique pressure wheel system adjusts from 30 to 90 degrees, meaning the same machine handles bevel-cut cabinet components and standard straight panels without tooling changes or secondary passes. The double heat gun design keeps glue temperature stable across both profiles, which matters when you alternate between PVC banding on MDF and melamine on particleboard within the same shift [NEED_CITE: thermal requirements for hot-melt adhesive activation on wood-based panels].
Reading the Numbers That Matter for Panel Quality
The pre-milled motor at 2.2 kW removes surface irregularities before the banding meets the panel edge, which directly affects glue line visibility on porous substrates like particleboard. Feed speed ranges from 0 to 12 m/min — slower speeds give the double heat guns more dwell time on thicker banding materials up to 3 mm, while thinner PVC at 0.3 mm runs cleanly at higher rates. The 4000 ml glue pot sustains longer runs without stopping for refills, reducing temperature fluctuations that cause inconsistent adhesion. Three spindle motors handle trimming in stages, leaving a clean edge that the 0.4 kW × 2 polishing units finish without burning the banding surface.
The Real Cost of Skipping Configuration Verification
Machines ordered on specification sheets alone often arrive with control panels in a language the operator cannot read, stalling commissioning while the factory scrambles for a translator. A unit configured for 50Hz running on a 60Hz supply overheats the trimming motors within weeks. When edge banding height and feed speed are not matched to your actual panel stock, the pressure wheels either crush thin veneer or fail to seat thick ABS properly [NEED_CITE: industrial machine commissioning failure causes by region].
Why Buyers Source This Model From Our Floor
The DW3000 ships fully assembled, so there is no on-site mechanical alignment to coordinate. Voltage, plug type, and control language are set to your specification before crating, confirmed with an electrical schematic. The four-stage quality check runs incoming material inspection, in-process verification, finished product testing, and a pre-shipment test record using your actual panel material. Spare parts and an operation manual in your chosen language go into the crate with the machine. We stock the full product family, so a workshop can add a second unit later without switching suppliers or retraining operators.
Documentation & Verification
- Factory test record run on your specified panel thickness and banding material before dispatch
- Electrical schematic and voltage confirmation sheet matching your facility supply
- Operation and maintenance manual printed in your agreed control panel language
- Spare parts list included in the crate for immediate reference on arrival
- Packing photographs taken at crating for shipping insurance and customs clearance
Installation, Commissioning & Support
- Requires a dedicated circuit matching the confirmed 380V or 415V supply with appropriate breaker rating for the 11 kW total load
- Machine arrives fully assembled at 299 × 65 × 130 cm, needing floor space plus clearance for panel infeed and outfeed
- Air supply must deliver 0.5–0.7 MPa clean, dry air to the connection point before first start-up
- Glue pot initial fill and temperature calibration performed during first power-on with your banding material loaded
- Oblique pressure wheel angle set and verified on your actual bevel-cut components during commissioning guidance
What We Need to Quote Your Shipment
Send your panel material types and thickness range, the edge banding materials you run most often, and your workshop’s confirmed voltage and frequency. Let us know your preferred control panel language and plug type. If you need a sample processing test on your own stock before committing, provide a few panels and we will run them through and return the finished pieces with the test record.
Frequently Asked Questions
Q: What is the dispatch lead time for the DW3000 from ready stock?
A: Units are held fully assembled in inventory. Once voltage, plug type, and control language are confirmed, the machine goes through pre-shipment testing and crating. Shipping options and transit times are quoted at the same stage based on your destination port. Dispatch timing depends on the configuration checks required for your specific electrical supply.
Q: Can voltage, plug type, and control panel language be customized before shipping?
A: Yes. The DW3000 supports 380V and 415V configurations with EU, USA, AU, and UK plug options. Control panels come in Chinese and English as standard, with Spanish and other languages available. Every unit is verified against your facility’s confirmed frequency and phase before leaving the floor.
Q: What edge banding materials and thickness range does the DW3000 handle?
A: The machine processes PVC, ABS, melamine, and veneer banding from 0.3 to 3 mm thickness and up to 50 mm height. The double heat gun design maintains consistent glue activation across these materials, and the 8-group oblique pressure wheel system adjusts for both bevel and straight profiles.
Q: Is single-unit ordering available, and how is shipping quoted?
A: Single-unit orders ship through the same process as larger consignments. Shipping is quoted based on your destination port and preferred terms at the order stage. The machine weighs 430 kg and ships fully assembled in a single crate.
Q: What documentation and spare parts are included with the machine on delivery?
A: Each DW3000 ships with a factory test record, electrical schematic confirming your voltage, operation manual in your chosen language, spare parts list, and packing photographs. CE and ISO 9001 documentation is provided with the customs paperwork.
