Description
Voltage-Locked Dispatch — every Model 802 automatic edge banding machine leaves the dock only after your local voltage, frequency, and control-panel language are verified against the electrical schematic.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | 802 |
| Product Type | Automatic Edge Banding Machine |
| Edge Type | Straight line |
| Rated Voltage | 220V |
| Rated Power | 4 kW |
| Trimming Power | 800 W × 2 |
| Polishing Power | 180 W × 2 |
| Suction Power | 1200 W |
| Heating Power | 1000 W (5-10 min heat-up) |
| Feed Speed | 0-10 m/min |
| Conveyor Belt Speed | 0-10 m/min |
| Strip Thickness Range | 0.5-2.5 mm |
| Sheet Thickness Range | 10-50 mm |
| Glue Pot Capacity | 4000 ml |
| Rated Air Pressure | 0.4-0.6 MPa |
| Pressure Beam | One-piece integrated, double rows of pressure wheels |
| Conveyor Belt Material | Silicone |
| Belt Breaking Method | Pneumatically controlled |
| Auxiliary Support | Extendable fluent strips |
| Control Panel | Digital display of glue pot temperature, independent switches |
| Overall Dimensions | 130 × 65 × 75 cm |
| Machine Weight | 150 kg |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom cabinet door and carcass edging | MDF and particleboard panels 10-50 mm thick |
| Small-batch furniture production | Plywood and blockboard with PVC or veneer banding |
| Joinery workshop first automation step | Straight-edge melamine and wood-veneer strips 0.5-2.5 mm |
| Contract furniture component finishing | Pre-cut panels requiring consistent glue-line quality |
Why the Voltage Question Should Come Before the Price
An automatic edge banding machine in stock means nothing if it cannot be powered on at your facility.
I once watched a container arrive in the Middle East carrying a 380 V unit destined for a 440 V factory floor. The operator stood in front of a silent control panel while a transformer spent four weeks on a cargo ship. That kind of delay does not show up in any brochure. When a buyer focuses only on feed speed or glue-pot size, the electrical mismatch hides until the crate is pried open [NEED_CITE: voltage and frequency standards by export market]. The Model 802 ships only after the motor winding, heater element, and control transformer are confirmed against the buyer’s single-line diagram.
Stock That Actually Matches Your Shop Floor
An Automatic Edge Banding Machine in stock should mean the configuration on the warehouse floor matches the configuration you need, not just the closest available variant. The Model 802 is held as a complete assembly with its 4 kW drive motor, 1000 W glue-pot heater, and 1200 W dust-extraction fan already wired. Before the unit is crated, the motor nameplate and heater rating are photographed beside your confirmed voltage specification so there is no ambiguity when the machine is unboxed.
Language and Labels Before the Lid Goes On
Control panels printed in a language the operator cannot read stall commissioning for days. The Model 802 digital display and independent switches are straightforward, yet every label, safety decal, and section of the operation manual is produced in the language you specify. This step is completed before the shipping frame is bolted down, eliminating the need for stick-on translations that peel off in a humid workshop [NEED_CITE: CE machinery directive requirements for industrial equipment].
Reading the Numbers That Matter
The 4000 ml glue pot holds enough adhesive to run continuous sealing passes without frequent refills, which keeps small-to-medium batch runs uninterrupted. Feed speed is adjustable from 0 to 10 m/min through the conveyor belt drive, letting the operator slow down for thick veneer or speed up for PVC on particleboard. The one-piece pressure beam with double rows of pressure wheels prevents panel drift, a common cause of uneven glue lines on sheets up to 50 mm thick. Pneumatically controlled belt breaking releases tension without manual prying, protecting the silicone belt surface and keeping feed accuracy consistent over long production days.
The Hidden Cost of Overlooking Conveyor and Pressure Details
A silicone conveyor belt that slips under a heavy MDF panel produces a visible skip in the edge band, and the operator may blame the glue rather than the belt material. When the pressure beam is assembled from multiple segments instead of one integrated casting, slight misalignment between sections leaves a visible seam in the banding, especially on glossy PVC [NEED_CITE: common causes of edge banding adhesion failure]. These faults only appear once the machine is running under load, by which time the container has already sailed and a return is impractical.
Why Source the 802 Through This Channel
Voltage, frequency, and panel language are locked before dispatch, so the machine arrives ready to commission on day one. Pre-shipment test records include photographs of the Model 802 processing your specified panel thickness and edge material. A single-unit order carries the same documentation pack as a full production line, because one misconfigured machine damages a reputation just as quickly as ten. Spare parts lists are matched to the exact trimmer and polishing motor variants installed in your unit, preventing the wrong brush or bearing from arriving six months later. Engineer-led configuration advice is provided within one working day of your inquiry, avoiding the weeks of back-and-forth that consume typical spot-purchase transactions.
Documentation & Verification
- Voltage and frequency confirmation sheet signed against your local supply spec
- Pre-shipment test record on your specified panel thickness and edge material
- Electrical schematic showing motor winding and heater circuit for the 802
- Operation and maintenance manual in your operator’s confirmed language
- Spare parts list matched to the exact trimmer and polishing motors installed
Installation, Commissioning & Support
- Requires a dedicated 220 V circuit rated for the 4 kW total draw of the Model 802
- Pneumatic line must supply 0.4-0.6 MPa clean, dry air to the belt-breaking cylinder
- Overall 130 × 65 × 75 cm footprint fits through a standard 90 cm workshop door
- Extendable fluent strips must be leveled with the conveyor before processing large panels
- Glue pot heat-up takes 5-10 minutes; first-run temperature calibration included in manual
- Silicone conveyor belt tension checked at commissioning and again after 40 operating hours
What We Need to Move Your Order Forward
Send the exact voltage and frequency at your facility, the panel materials and thickness range you process most often, and the language your operators read. If you run existing upstream saws or downstream boring machines, share their feed height so the Model 802 conveyor can be aligned without custom shimming.
Frequently Asked Questions
Q: What voltage and frequency options are available, and how is my local supply confirmed before shipping?
A: The Model 802 motor, heater, and control circuit can be configured for your site voltage and frequency. Before crating, we cross-check your single-line diagram and send a signed confirmation sheet with photographs of the motor nameplate and heater rating so there is no mismatch on arrival.
Q: What is the dispatch lead time for a single-unit order of the 802 edge bander?
A: Once voltage, language, and panel spec are confirmed, the stocked Model 802 is prepared, tested on your material, photographed, and crated. Single-unit orders typically ship within the standard pre-shipment verification window, avoiding the multi-week delays of made-to-order builds.
Q: Which edge banding materials and panel thicknesses does the 802 handle in stock configuration?
A: The machine processes straight-edge PVC, melamine, and wood-veneer strips from 0.5 to 2.5 mm thick on panels ranging from 10 to 50 mm. The 4000 ml glue pot and adjustable feed speed accommodate both thin veneer on cabinet doors and thicker PVC on wardrobe carcasses.
Q: Is the control panel available in my operator’s language, and can it be changed before delivery?
A: Yes. The digital display labels, safety decals, and printed operation manual are all produced in the language you specify. This is completed during the pre-shipment preparation stage, so the operator can begin commissioning without waiting for translated documents.
Q: What spare parts and documentation ship with the machine, and how do I reorder consumables?
A: Every Model 802 ships with a spare parts list matched to the installed trimmer and polishing motors, packing photographs, and a full manual. The spare parts list includes part numbers so you can reorder belts, bearings, and trimming cutters directly without reverse-engineering components.
