Description
Ready to Dispatch — Voltage and plug confirmed against your local supply before any stocked ST-70 unit leaves our facility.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | ST-70 |
| Product Type | Portable Edge Banding Machine |
| Total Power | 1000W |
| Voltage & Frequency | 220V/380V/customization (basis not stated in source) |
| Control System | PLC (basis not stated in source) |
| Overall Dimensions (L×W×H) | 50×50×47 cm |
| Net Weight | 23 kg |
| Edge Banding Height Range | 0–50 mm |
| Edge Banding Thickness Range | 0.3–3 mm |
| Minimum Sheet Length | 25 cm |
| Minimum Sheet Width | 3 cm |
| Edge Motor Power | 20W |
| Air Source Pressure | 0.5–0.8 MPa |
| Glue Pot Capacity | 1000 ml |
| Feed Speed | (basis not stated in source) |
| Panel Thickness Range | (basis not stated in source) |
| Tolerance | (basis not stated in source) |
| Standard Features | Curved and straight edge banding |
| Language Options | Chinese and English standard; Spanish and other languages customizable |
| Plug Options | EU, USA, AU, UK |
| Assembly State | Fully assembled, portable tabletop unit |
Application Suitability
| Application | Material or Output |
|---|---|
| Small-batch cabinet door edging | MDF and particleboard with PVC or veneer tape |
| Furniture repair and on-site touch-up | Solid wood board and ecological board |
| Home decoration joinery | Plywood panels with straight and curved profiles |
| Workshop transition from hand-sealing | Melamine-faced board and multi-layer board |
Why the Voltage Question Must Come Before the Dispatch Date
A portable edge banding machine in stock means nothing if the motor burns out on first power-up.
I once watched a Southeast Asian cabinet maker wait over two weeks for a step-down transformer because the voltage on his new edge bander was never confirmed against his workshop supply. The entire assembly line sat idle while glue cooled in the pot and panels stacked up unfinished. That Portable Edge Banding Machine in stock became the most expensive paperweight in the factory [NEED_CITE: common voltage mismatch incidents in cross-border machinery trade].
Every export market runs on different standards. A 220V/50Hz unit shipped to a 60Hz region will run its glue pot heater and feed motor at incorrect speeds, causing adhesion failures that only show up after the customer has already installed the panels in a kitchen. Confirming frequency and plug type before dispatch is a small step that prevents large losses.
What Ready Stock Actually Means for Your Timeline
When you need a Portable Edge Banding Machine in stock, the priority is not just availability on a shelf. It is having a unit that has been tested on your target material, configured for your voltage, and packed with the correct plug and manual before it leaves the loading bay. Stocked units at our facility go through the same pre-shipment glue adhesion test as made-to-order machines, so you receive a unit ready for production on day one.
Dispatch Lead Time and Single-Unit Ordering
Small workshops and furniture repair contractors rarely need container loads. The ST-70 ships as a single unit in a wooden crate, and our stocked inventory means typical dispatch within days once your voltage and language are locked in. This is important for contractors who have just won a renovation project and need mechanized edge sealing to replace slow hand-taping before the installation deadline [NEED_CITE: typical dispatch timelines for stocked small woodworking machinery].
Reading the Numbers That Matter for Small-Batch Edging
The 1000W total power rating drives both the glue pot heater and the feed mechanism, which means the ST-70 can maintain stable melt temperature on standard EVA hot-melt adhesives used for PVC and veneer tape. The 1000 ml glue pot capacity supports continuous small-batch runs without stopping to refill, which matters when you are edging twenty cabinet doors in a single session.
Edge banding thickness from 0.3 to 3 mm covers the full range of PVC, melamine, and real wood veneer tapes available in most regional hardware markets. The 0–50 mm banding height range lets you handle everything from thin drawer sides to thicker shelving panels. Air supply at 0.5–0.8 MPa is compatible with the standard reciprocating compressors already present in most small joinery workshops, so no additional air infrastructure is required.
The Hidden Cost of Skipping Pre-Dispatch Verification
A machine that arrives with the wrong plug or an unreadable control panel does not just delay one job. It forces the buyer to source local electricians for rewiring, wait for replacement manuals, and risk voiding the warranty by opening the electrical cabinet. For a small workshop running on tight project margins, these unplanned costs quickly exceed the shipping savings of buying from an unverified source [NEED_CITE: hidden commissioning costs in imported woodworking equipment].
Why Buyers Source This Model Through Our Stock Channel
Voltage and plug configuration are confirmed against your local supply with photographic evidence before crating. Language on the PLC panel is set to your operator’s preference — English, Spanish, or other by request — so commissioning does not stall on translation. Every stocked ST-70 ships with a factory test record showing glue adhesion results on the panel material you specify. Wooden box packaging includes packing photographs for customs inspection, reducing clearance delays at your port. Our stock channel supports single-unit orders, so you can trial one machine before committing to a larger line purchase.
Documentation & Verification
- CE declaration matching your import classification for woodworking machinery
- Voltage and frequency confirmation sheet signed against your local supply photo
- Factory test record showing glue adhesion on your specified panel material
- Operation and maintenance manual in your chosen language before dispatch
- Electrical schematic for local electrician reference during installation
Installation, Commissioning & Support
- Requires a dedicated 220V or 380V circuit matching the confirmed frequency rating
- Tabletop placement on a stable bench; no floor anchoring needed at 23 kg
- Arrives fully assembled — connect air hose at 0.5–0.8 MPa and power on
- First-run guidance covers glue temperature setting for your specific tape material
- Spare glue pot liner and replacement pressure roller included in the crate
What We Need to Ship Your Unit
Send us a photo of your workshop electrical panel so we can match voltage, frequency, and plug type exactly. Tell us the primary board material and edge tape you will run most often, and we will set the glue pot temperature profile and include a matching test record. Let us know your preferred manual language so the operator can start production without delays.
Frequently Asked Questions
Q: Is the ST-70 currently in stock and what is the dispatch lead time?
A: Stocked units are available for dispatch once your voltage, plug type, and manual language are confirmed. After these details are locked in, typical lead time is measured in days rather than weeks. We share photographic proof of your specific unit before crating.
Q: Can I order a single unit or is there a minimum order quantity?
A: Single-unit orders are standard on our stock channel. The ST-70 ships in a wooden crate suitable for LCL or courier freight, so you can trial one machine in your workshop before planning additional purchases for other stations.
Q: How do I confirm the correct voltage and plug type for my country?
A: Send a photograph of your workshop electrical distribution panel. Our engineers cross-reference it against the ST-70 voltage options and confirm the exact configuration in writing before dispatch, so the machine matches your supply on arrival.
Q: What shipping options are available and how is freight handled?
A: Stocked ST-70 units ship via LCL sea freight or international courier depending on your urgency and destination port. Freight is quoted after your address is confirmed, and packing photographs are provided for customs clearance at your end.
Q: What spare parts ship with the machine and how do I reorder?
A: Each unit includes a spare glue pot liner and replacement pressure roller. Consumable parts such as glue pot heaters and edge trimming blades can be reordered directly from our stock channel with typical dispatch timelines matching the machine itself.
