Description
Ready Stock, Fast Dispatch — ST-50 portable edge banding machine ships from our warehouse with voltage and plug type confirmed for your market before it leaves the factory floor.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | ST-50 |
| Product Type | Portable Edge Banding Machine |
| Rated Power | 1000W |
| Voltage & Frequency | 220V / 380V / customization (frequency 50Hz or 60Hz to be confirmed per market) |
| Edge Feed Power | 20W |
| Control System | Manual operation with electric feed |
| Edge Banding Height Range | 0–50 mm |
| Edge Banding Thickness Range | 0.3–3 mm |
| Minimum Sheet Length | 25 cm |
| Minimum Sheet Width | 3 cm |
| Glue Pot Capacity | 1000 ml |
| Air Source Pressure | 0.5–0.8 MPa |
| Standard Features | Curved and straight edge banding |
| Assembly State | Portable, bench-top |
| Overall Dimensions (L×W×H) | 50×50×47 cm |
| Net Weight | 22 kg |
| Language Options | Chinese, English; customization available |
| Certification | CE, ISO 9001 |
Application Suitability
| Application | Material or Output |
|---|---|
| Small workshop furniture panel edge banding | MDF, particleboard, plywood |
| Custom cabinet edge sealing | Ecological board, solid wood board |
| On-site furniture repair and touch-up | PVC and veneer edge banding strips (0.3–3 mm) |
| Home decoration trim finishing | Curved and straight profiles on panel stock |
Why the Voltage Question Should Come Before the Price on a Portable Edge Bander
A portable edge banding machine in stock fast delivery means nothing if the motor overheats on first power-up because the frequency was wrong.
I have seen this play out more than once. A compact edge bander arrives at a small joinery shop in Southeast Asia. The operator plugs it in, runs the first panel, and within minutes the motor trips the breaker. The voltage matched, but the frequency did not — 60 Hz supply feeding a motor wound for 50 Hz. The shop sits idle while a replacement motor ships across borders. A portable edge banding machine in stock fast delivery only delivers value when the electrical configuration has been verified against the buyer’s actual workshop supply, not just the country’s nominal standard [NEED_CITE: voltage and frequency standards by export market].
Dispatch Timing and What In-Stock Really Means
When a joinery workshop decides to move from hand-applied edge banding to machine-assisted sealing, downtime between decision and production is the real cost. The ST-50 sits in our warehouse as a stocked model, meaning the lead time is measured in days for dispatch rather than weeks for build-to-order. For buyers evaluating a portable edge banding machine in stock fast delivery, the relevant question is whether the stocked configuration matches the destination market’s electrical and language requirements, or whether a short customization hold is needed before the crate closes.
What a 22 kg Bench-Top Unit Changes for a Small Shop
The ST-50 weighs 22 kg and sits on a standard workbench. No floor anchoring, no dedicated three-phase line, no compressed air system beyond a typical workshop compressor rated to 0.5–0.8 MPa. A startup cabinet maker can place this unit beside an existing sliding table saw and begin edge sealing the same afternoon. The bench-top form factor also means the machine travels to job sites — installers doing on-site furniture repair can load it into a vehicle and run curved or straight edge banding on location [NEED_CITE: typical workshop compressor ratings for small-scale edge banding equipment].
Reading the Specs That Matter for Edge Quality
The edge banding thickness range of 0.3–3 mm covers the two most common material families in small-shop work: thin PVC strips for melamine-faced particleboard and thicker veneer strips for solid wood and plywood applications. Staying within this range ensures the glue pot at 1000 ml capacity maintains consistent adhesive temperature across the feed path. The 0–50 mm edge banding height range accommodates standard panel thicknesses used in cabinet carcass and shelving production. The 20W edge feed motor provides steady strip advancement without stretching thin PVC, which is where visible glue lines often originate on entry-level equipment. Minimum sheet dimensions of 25 cm length and 3 cm width define the lower boundary — small offcuts and narrow stile pieces fall within range, but anything smaller requires hand application.
The Hidden Cost of Skipping Electrical Verification
Buyers focused on unit price sometimes treat voltage as a checkbox — 220V is 220V. But frequency mismatch causes the motor to run outside its designed thermal envelope. The result is not immediate failure; it is gradual insulation breakdown over the first weeks of operation, followed by an unexpected motor burnout during a production run. The replacement motor ships, but the shop has already missed delivery deadlines and absorbed return shipping costs. This pattern repeats across markets where 50 Hz and 60 Hz grids coexist within the same region [NEED_CITE: motor thermal degradation from frequency mismatch in exported machinery].
Why Buyers Source This Model Through Our Stock Channel
The ST-50 is stocked because small workshops and furniture repair operations do not plan edge banding purchases months ahead — they need a machine when a job demands it. Our dispatch workflow confirms voltage, frequency, plug type, and control panel language before the unit leaves the warehouse, eliminating the arrival-surprise problem. Every stocked ST-50 passes a pre-shipment test run on actual panel material, and the test record ships in the documentation package. Single-unit orders are standard here — there is no minimum order quantity padding the invoice. The product family also includes higher-capacity models, so a workshop that outgrows the ST-50 can move to a full-function edge bander from the same supplier without relearning a new control interface.
Documentation & Verification
- CE declaration of conformity covering the ST-50 portable unit
- Pre-shipment test record with photos on your specified panel material and edge thickness
- Electrical schematic confirming voltage, frequency, and plug type for your market
- Operation and maintenance manual in your agreed language at shipment
- Spare parts list covering glue pot elements, feed rollers, and trimming blades
Installation, Commissioning & Support
- Bench-top placement on any stable surface rated for 22 kg, no floor anchoring required
- Single-phase power connection at confirmed voltage with a dedicated 1000W circuit breaker
- Air supply from a standard compressor at 0.5–0.8 MPa via quick-connect fitting
- First-run glue temperature calibration for your specific PVC or veneer strip thickness
- Operator familiarization on curved and straight profiles using included sample material
Before You Request a Quote
Send us your workshop’s confirmed voltage and frequency — not the country default, but the actual supply at the machine’s location. Tell us which edge banding materials you run most often and the panel thickness range you typically process. If you are replacing a manual edge banding workflow, describe your current daily volume so we can confirm the ST-50 matches your throughput or recommend the next step up in the product family.
Frequently Asked Questions
Q: Is the ST-50 in stock and how fast can it ship?
A: The ST-50 is maintained as a stocked model in our warehouse. Dispatch timing depends on whether your order requires voltage customization or language-specific control panels. Standard configurations ship within days of order confirmation, while custom electrical configurations add a short hold for rewiring and verification before dispatch.
Q: What voltage and plug options are available for my country?
A: The ST-50 supports 220V and 380V configurations with customization available. Frequency must be confirmed as 50 Hz or 60 Hz to match your local grid. We confirm the exact plug type and provide an electrical schematic before the machine ships, preventing the motor mismatch problems that occur when frequency is assumed rather than verified.
Q: Can I order a single unit, and what is the shipping method?
A: Single-unit orders are standard on our stock channel. The ST-50 ships as a portable bench-top unit at 22 kg net weight with overall dimensions of 50×50×47 cm. Shipping options are quoted at the order stage based on your destination port or door address, with packing photographs provided before the crate leaves our warehouse.
Q: What edge banding materials and thicknesses does this machine handle?
A: The ST-50 handles PVC and veneer edge banding strips in the 0.3–3 mm thickness range on both curved and straight profiles. Compatible panel materials include MDF, particleboard, plywood, ecological board, and solid wood board. The 1000 ml glue pot sustains small-batch runs without requiring frequent adhesive refills during a work session.
Q: What spare parts and consumables come with the machine?
A: A spare parts list ships with every ST-50, covering wear items such as feed rollers, trimming blades, and glue pot heating elements. The documentation package also includes an operation manual in your agreed language and an electrical schematic matching your confirmed voltage and frequency configuration.
