Description
Ready Stock Dispatch — DW102 compact automatic edge bander units held in warehouse inventory with confirmed voltage, plug type, and operator language before the crate closes.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | DW102 |
| Product Type | Automatic Edge Banding Machine |
| Total Power | 3800W |
| Voltage Options | 220V / 380V / customization |
| Frequency | 50Hz / 60Hz (basis to be confirmed) |
| Control System | PLC |
| Edge Trimming Power | 650W × 2 |
| Polishing Power | 180W × 2 |
| Edge Feed Power | 20W |
| Transmission Power | 60W |
| Vacuum Hold-Down Power | 1200W |
| Glue Pot Capacity | 1500 ml |
| Air Source Pressure | 0.5–0.8 MPa |
| Edge Banding Height Range | 0–50 mm |
| Edge Banding Thickness Range | 0.3–3 mm |
| Minimum Panel Length | 25 cm |
| Minimum Panel Width | 5 cm |
| Product Size (L×W×H) | 128 × 47 × 69 cm |
| Product Weight | 75 kg |
| Language Options | Chinese / English standard; other languages on request |
| Plug Options | EU / USA / AU / UK |
| Assembly State | Fully assembled |
| Feed Speed | (basis not stated in source) |
| Panel Thickness Range | (basis not stated in source) |
| Tolerance | (basis not stated in source) |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom cabinet door edge finishing | MDF and particleboard with PVC or veneer banding |
| Small-batch furniture panel processing | Plywood and blockboard with straight and curved edges |
| Polymer door frame banding | Polymer substrates requiring curved contour trimming |
| Workshop upgrade from manual banding | Mixed wood panels in low-to-medium volume joinery shops |
Why the Voltage Question Should Come Before the Price on Any Automatic Edge Banding Machine in Stock
A machine that cannot plug into your local supply is not a bargain — it is a warehouse ornament.
I have watched cabinet factories in the Middle East lose weeks of production because an edge bander arrived wired for a voltage standard that did not match the facility. The unit sat on the floor while a transformer was sourced locally, delaying the entire finishing line [NEED_CITE: voltage and frequency standards by export market]. With the DW102, the voltage, frequency, and plug type are confirmed at the point of order, not discovered at the point of uncrating. This matters especially when sourcing an Automatic Edge Banding Machine in Stock where speed is the reason you chose a stocked unit in the first place.
Stock Availability Without the Guesswork
When a workshop needs an Automatic Edge Banding Machine in Stock, the conversation should be about dispatch timing, not production lead weeks. The DW102 is held as a fully assembled unit, meaning it leaves the warehouse ready to run once it reaches your floor and connects to confirmed power and air supply. There is no build queue to wait through and no partial assembly to manage on arrival.
Dispatch Timing You Can Plan Around
The value of a stocked DW102 is the ability to slot it into a project timeline without padding for manufacturing delays. Once voltage, plug configuration, and control panel language are locked in at the order stage, the unit moves through pre-shipment verification and into the shipping crate [NEED_CITE: pre-shipment testing protocols for woodworking machinery]. For workshops replacing a failed machine mid-project or expanding capacity to meet a contract deadline, this timeline compression is often the deciding factor.
Reading the Numbers That Actually Matter on the Shop Floor
The 1500 ml glue pot capacity on the DW102 determines how many linear meters of edge you can run before stopping to refill — a practical concern for shops processing batches of cabinet components. The dual 650W trimming motors and dual 180W polishing stations mean the machine handles trimming and finishing in a single pass, which matters when you are running MDF panels that chip easily if the trimmer is underpowered. The 1200W vacuum hold-down keeps thinner panels flat against the feed bed, reducing the drift that causes uneven glue lines on plywood substrates. Panel minimums of 25 cm length and 5 cm width set the boundary for the smallest drawer fronts and narrow stile pieces this unit can process.
What Happens When Electrical Specs Get Skipped
Ordering a stocked machine without confirming voltage is the most common preventable failure I encounter in the field. A 380V unit delivered to a 440V facility does not simply underperform — it trips breakers, damages motor windings, and voids the warranty in ways that are entirely avoidable [NEED_CITE: electrical mismatch damage in industrial machinery]. The cost of a local step-down transformer often exceeds what a voltage confirmation conversation would have taken at the order stage. This is why every DW102 dispatch includes a documented electrical spec check before the machine is cleared for crating.
Why Procurement Teams Choose This Channel
The DW102 ships with voltage and plug type matched to your facility, eliminating the arrival-day surprises that stall commissioning. A four-stage quality check runs through incoming material inspection, in-process assembly verification, finished product testing, and a final pre-shipment run with your specified panel material. The control panel language is set to your operator’s requirement before the machine leaves the floor — English is standard, with other languages configured on request. Single-unit orders ship with the same documentation package as larger batches: specification sheet, electrical schematic, factory test record, and operation manual. An engineer reviews your processing requirements and confirms the configuration within one working day, so the unit you receive matches the line it is joining.
Documentation & Verification
- Electrical schematic confirming voltage, frequency, and plug type for your DW102 unit
- Factory test record showing edge finish output on your specified panel material and thickness
- Operation and maintenance manual in the control panel language you selected at order
- Spare parts list covering trimming cutters, polishing wheels, and glue pot consumables
- Packing photographs documenting machine condition and crate sealing before dispatch
Installation, Commissioning & Support
- The 128 × 47 × 69 cm footprint requires a level concrete floor with clearance for panel infeed and outfeed on both sides
- A dedicated circuit matching the confirmed voltage and the 3800W total power draw must be in place before the unit is uncrated
- The DW102 ships fully assembled, so installation involves positioning, power connection, and air supply hookup at 0.5–0.8 MPa
- First-run calibration covers glue pot temperature setting for your banding material and trimmer alignment for your panel thickness
- Replacement trimming cutters and polishing wheels are listed in the included spare parts document with reorder references
What to Prepare Before You Request a Quote
Tell us the panel materials you process most often — MDF, particleboard, plywood, or a mix — and the edge banding material type and thickness you run. Confirm your facility voltage, frequency, and the plug standard in use so the DW102 can be configured correctly before it enters the crate. If your operators need a control panel in a language other than English or Chinese, specify that at the inquiry stage so it is ready on arrival.
Frequently Asked Questions
Q: Is the DW102 currently in stock, and how quickly can it ship?
A: DW102 units are held as ready stock in fully assembled condition. Once your voltage, plug type, and control panel language are confirmed, the unit goes through pre-shipment testing and enters the dispatch queue. Actual shipping time depends on destination and freight method, but there is no manufacturing lead time to add to the schedule.
Q: Can I order a single DW102 unit, or is there a minimum quantity?
A: Single-unit orders are accepted with the same configuration options and documentation package as larger batches. There is no minimum order quantity requirement, making the DW102 suitable for workshops adding one edge bander to an existing line or replacing a machine that has reached end of service life.
Q: How do I confirm the correct voltage and plug type for my country?
A: Provide your facility voltage, phase configuration, and frequency at the inquiry stage. The DW102 supports 220V and 380V with EU, USA, AU, and UK plug options, and custom configurations are available. This confirmation is completed before the machine is cleared for dispatch to prevent electrical mismatches on arrival.
Q: What is the minimum panel size the DW102 can process?
A: The DW102 handles panels with a minimum length of 25 cm and a minimum width of 5 cm. Edge banding height ranges from 0 to 50 mm with banding thickness from 0.3 to 3 mm, covering most standard cabinet door, drawer front, and shelf panel dimensions in MDF, particleboard, and plywood.
