Description
Stock Verified — ZDS-700 curved edge banding and trimming machine held in warehouse inventory, electrical configuration confirmed against order specifications before dispatch.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | ZDS-700 |
| Product Type | Automatic Curved Edge Banding and Trimming Machine |
| Voltage & Frequency | 380V / 50Hz |
| Total Power | 6 kW |
| Edge Banding Speed | 0–22 m/min (variable via servo drive) |
| Edge Band Thickness Range | 0.5–3 mm |
| Edge Band Width Range | 14–70 mm |
| Glue Pot Capacity | 2600 ml |
| Glue Types Supported | PUR and EVA |
| Glue Pot Operating Temperature | 110–210°C |
| Docking Accuracy | ±0.3 mm (laser displacement sensor measurement) |
| Edge Banding Motor | 220V 400W servo motor |
| Trimming High-Speed Motor | 220V 400Hz 24,000 rpm |
| Trimming Profiling Motor | 220V 60W single-phase motor |
| Air Pressure Requirement | 0.6–0.8 MPa |
| Air Storage Tank Volume | 2 L |
| Touch Screen | Industry IT7000 |
| PLC | HIU-XP |
| Frequency Transformer | MD200 2.2 kW |
| Laser Displacement Sensor | 1030 series |
| Cleaning Devices | 4 units with automatic cleaning liquid spray |
| Hot Air Device | Integrated for strip-to-plate bonding reinforcement |
| LCD Screen Adjustment | Rotatable 50° left and right |
| Touch Screen Data Storage | 20 form data sets |
| Stacking Arm Length | 2270 mm |
| Feed Mechanism | Curve plate automatic feeding |
| Dust Extraction | Enlarged dust suction port with air pump dust removal |
| Overall Dimensions | 1550 × 1440 × 1350 mm |
| Net Weight | 451 kg |
Application Suitability
| Application | Material or Output |
|---|---|
| Curved cabinet door edge banding | MDF and particleboard with PVC or melamine edge band (0.5–3 mm) |
| Rounded tabletop contour finishing | Plywood and solid wood panels with veneer edge band (14–70 mm wide) |
| Shaped shelving edge treatment | MDF shelving components with PVC edge banding on curved profiles |
| Custom joinery components | Contoured panel parts requiring PUR or EVA adhesive bonding |
| Small-batch production runs | Mixed panel shapes where frequent profile changeover is required |
Why the Voltage Question Must Be Settled Before Dispatch
Every ZDS-700 curved edge banding machine in stock is verified against the buyer’s confirmed electrical supply before release from the warehouse.
A machine built for 380V/50Hz that arrives at a workshop running a different supply standard will not simply underperform — control boards fail, servo motors burn out, and frequency transformers overheat within hours of first connection. I once oversaw a shipment of curved edge banders to Southeast Asia where the local supply voltage had not been confirmed during the order stage. The machines were rated for 220V but connected to 380V on site, destroying the control boards. Replacement components had to be air-freighted, and commissioning was delayed by weeks. That curved edge banding machine in stock now ships with a confirmed electrical schematic matched to the destination country, eliminating this failure point entirely [NEED_CITE: voltage and frequency standards by export market].
Stocked Configuration and What It Means for Your Timeline
Ordering a curved edge banding machine in stock eliminates the typical production queue. The ZDS-700 units held in inventory have completed assembly, passed the pre-shipment electrical verification, and are staged for crating. When a buyer confirms the destination voltage and provides the required documentation, the machine moves to dispatch within a short window rather than entering a multi-week build cycle. This matters most for workshops that have taken on a curved-panel furniture order and cannot afford to wait for a machine to be manufactured from scratch.
Dual-Glue Capability Across PUR and EVA Adhesives
The 2600 ml glue pot on the ZDS-700 supports both PUR and EVA adhesives with an operating temperature range of 110–210°C. PUR adhesive delivers stronger moisture-resistant bonds suitable for kitchen and bathroom cabinetry, while EVA remains the standard for general-purpose furniture edge banding. Having both options available on a single machine means a workshop can switch adhesive types between jobs without maintaining two separate edge banders. The heat preservation function on the glue pot maintains temperature stability between production runs, reducing warm-up delay and preventing adhesive degradation during idle periods [NEED_CITE: PUR vs EVA adhesive performance in edge banding applications].
Reading the Specs That Matter for Curved-Panel Work
The ±0.3 mm docking accuracy, measured by the 1030 series laser displacement sensor, directly determines whether the edge band meets the panel end cleanly without visible gaps or overhang. On curved profiles, even minor docking errors compound along the contour and become visible after trimming. The 220V 400W servo motor driving the edge band feed responds to speed changes in real time, maintaining consistent tension as the panel curves through the feed path — a single-phase motor would introduce lag at direction changes. The trimming high-speed motor running at 24,000 rpm ensures a clean cut on PVC and melamine edge banding up to 3 mm thick without chipping or tear-out. Four integrated cleaning devices with automatic spray remove adhesive residue immediately after trimming, preventing build-up that would otherwise require manual scraping between jobs. The enlarged dust suction port paired with the air pump dust removal system keeps the work area clear of fine particle debris, which is critical when working MDF panels that generate substantial dust during trimming.
What Happens When Electrical Details Get Overlooked
A curved edge bander is one of the more electrically complex machines in a woodworking shop — it combines servo motors, a frequency transformer, a PLC, a high-speed trimming motor, and a heated glue pot on a single power circuit. If the supply frequency does not match the machine rating, the servo drive will behave unpredictably, causing the edge band feed speed to fluctuate and producing inconsistent bonding pressure along the panel contour. The frequency transformer rated MD200 2.2 kW is calibrated for 50Hz operation; running it on a 60Hz supply without adjustment shifts its output characteristics and can damage downstream motor windings. These failures do not appear during a brief test run — they surface after hours of production, often destroying the control board beyond field repair [NEED_CITE: industrial motor failure from frequency mismatch].
Reasons Buyers Source This Stocked Unit From Here
The ZDS-700 units in inventory are built with patented cutting mechanisms that hold verified tolerances, and each machine passes through four QC stages including a pre-shipment verification run. Voltage and control panel language are confirmed per order as standard, not treated as optional extras. The product range spans from entry-level to full-function configurations within one family, so a workshop that later adds flat-panel capacity can source compatible machines from the same line. An engineer-led configuration review ensures the machine matches the buyer’s actual panel materials and production volume before the order is finalized, with a formal quotation provided within 24 hours. Factory visits are welcomed for buyers who want to inspect the machine before it ships.
Documentation & Verification
- Factory test record captured on the buyer’s specified panel thickness and edge band material before dispatch
- Electrical schematic with voltage and frequency values confirmed against destination supply standard
- Operation and maintenance manual produced in the language agreed during order confirmation
- Spare parts list itemizing consumables and wear components specific to the ZDS-700 configuration shipped
- Packing photographs documenting crating condition and component securing before container loading
- CE declaration of conformity documentation included with shipment for customs clearance
Installation, Commissioning & Support
- Requires a dedicated 380V/50Hz circuit rated for the 6 kW total power draw with proper grounding
- Overall footprint of 1550 × 1440 mm needs clear access on three sides for panel loading and trimming maintenance
- Air supply must deliver 0.6–0.8 MPa consistently to the 2L storage tank for reliable pneumatic actuation
- LCD screen rotatable 50° left and right allows operator positioning adjustment during first-time setup
- 20 form data sets on the IT7000 touch screen store job parameters for repeat curved-profile production runs
- Hot air device and glue pot calibration verified during commissioning to match local ambient temperature conditions
What We Need to Move Your Order Forward
Provide your workshop’s local voltage and frequency so we can verify the ZDS-700 electrical configuration matches before crating. Share the panel materials and edge band types you plan to process — MDF, plywood, particleboard, or solid wood, along with PVC, melamine, or veneer banding — so we confirm the glue pot and trimming setup is correct. If you have specific curved profiles or panel dimensions, send drawings or samples so we can validate feed path clearance and stacking arm reach against your actual production requirements.
Frequently Asked Questions
Q: Is the ZDS-700 curved edge banding machine currently in stock and what is the dispatch lead time?
A: Yes, ZDS-700 units are held in warehouse inventory and have completed assembly and pre-shipment electrical verification. Once the buyer confirms destination voltage and required documentation language, the machine is prepared for crating and dispatch within a short turnaround window. Exact timing depends on the customization requested and current shipping availability from the port.
Q: Can the voltage be changed to match my country’s electrical supply before the machine ships?
A: The ZDS-700 is stocked at 380V/50Hz, but voltage configuration from 110V to 440V is available on request before dispatch. The electrical schematic is updated to reflect the confirmed supply standard, and all motor and transformer ratings are verified against the new configuration. This step is completed and documented before the machine leaves the warehouse.
Q: What edge banding materials and thicknesses does the ZDS-700 handle?
A: The machine processes PVC, melamine, and veneer edge banding from 0.5 mm to 3 mm thick and 14 mm to 70 mm wide. The 2600 ml glue pot operates between 110°C and 210°C and supports both PUR and EVA adhesives, giving flexibility across different bonding requirements and workshop ambient conditions.
Q: What spare parts and consumables are included when the ZDS-700 ships?
A: Each machine ships with a spare parts list detailing consumables and wear components specific to the ZDS-700 configuration. The packing includes essential replacement items for initial operation. The documentation package contains an operation manual in the agreed language, electrical schematic, and maintenance schedule to support ongoing servicing.
Q: Do you provide installation guidance and after-sales support for this stocked curved edge bander?
A: Yes, installation guidance covers electrical connection, air supply setup, and initial parameter configuration for the IT7000 touch screen and PLC system. After-sales support includes troubleshooting assistance for the servo drive, laser sensor calibration, and trimming motor maintenance. The 20 stored form data sets allow operators to save and recall job settings independently after initial commissioning.
