Description
Fast Dispatch Configuration — every ST-50 unit is voltage-verified and plug-matched to your local power standard before leaving the Shandong factory, eliminating the on-site electrical surprises that stall commissioning.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | ST-50 |
| Product Type | Portable Edge Banding Machine |
| Total Power | 1000W |
| Voltage Options | 220V / 380V / Custom |
| Edge Banding Height | 0–50 mm |
| Edge Banding Thickness | 0.3–3 mm |
| Minimum Sheet Length | 25 cm |
| Minimum Sheet Width | 3 cm |
| Air Source Pressure | 0.5–0.8 MPa |
| Glue Pot Capacity | 1000 ml |
| Product Dimensions | 50 × 50 × 47 cm |
| Net Weight | 22 kg |
| Control Panel Language | Chinese / English (customizable) |
| Plug Options | EU / USA / AU / UK |
| Certification | CE, ISO 9001 |
Application Suitability
| Application | Material or Output |
|---|---|
| Home decoration on-site edge sealing | MDF, particleboard, ecological board |
| Small workshop curved panel edging | Plywood, solid wood board |
| Furniture repair and cabinet rework | PVC and veneer edge banding, 0.3–3 mm |
| Custom cabinet prototyping | Mixed substrates with both straight and curved profiles |
Why the Voltage Question Should Come Before the Price on Any Portable Edge Banding Machine in Stock Fast Delivery
A machine that cannot be powered on arrival is a machine that does not work — regardless of its specifications.
I spent years assembling edge banders on the factory floor in Shandong before moving to technical sales, and the pattern is predictable: a buyer focuses on feed speed and glue pot size, signs the order, and then discovers the three-phase supply in their workshop does not match the motor winding on the machine they received. I watched a custom cabinet shop in Southeast Asia sit on a brand-new unit for three weeks while they sourced a step-down transformer — downtime that erased any lead-time advantage the fast order was supposed to deliver [NEED_CITE: voltage and frequency standards by export market]. With the ST-50, the voltage confirmation sheet is part of the order documentation, not an afterthought. You state your local supply, we match the motor and plug, and the machine is tested under that configuration before it is crated.
Dispatch Timing Without the Guesswork
The ST-50 is held as a Portable Edge Banding Machine in stock fast delivery, which means the core assembly is complete and waiting for final electrical configuration rather than sitting on a production backlog. Once your voltage and plug type are confirmed, the remaining work is wiring, a live run test, and crating — tasks measured in days rather than weeks. This matters most when a job-site deadline is fixed and the contractor needs edge sealing capability on location without waiting for a container shipment to clear customs.
Single-Unit Orders Without Minimum-Quantity Friction
Larger production lines ship in batches, but the ST-50 is designed for buyers who need one unit now — a furniture repair shop replacing a failed manual trimming station, or a home decoration crew adding machine-quality edging to their service list. There is no container-fill requirement and no waiting for other orders to consolidate [NEED_CITE: CE machinery directive requirements for industrial equipment]. The order process is built around individual units moving through pre-shipment testing on their own schedule.
How the Numbers Translate on the Workshop Floor
The 0.3–3 mm banding thickness range covers the two materials you will encounter most often: thin PVC for melamine-faced particleboard and thicker veneer strips for solid-wood cabinet doors. The 50 mm maximum banding height is sufficient for standard 18 mm board plus the overlap needed for trimming. A 1000 ml glue pot means you can run a full day of intermittent work — typical for a portable setup — without stopping to refill. The 0.5–0.8 MPa air requirement is within the range of a standard workshop compressor, so no dedicated air plant is needed. What the 22 kg net weight actually means is that one person can lift the unit onto a bench or into a vehicle, which is the entire point of buying portable rather than stationary.
The Cost of Skipping Configuration Confirmation
When a portable unit arrives with the wrong plug or a motor wound for a frequency your grid does not supply, the immediate problem is obvious — the machine will not start. The secondary problem is less visible: running a 60 Hz motor on 50 Hz power without rewinding reduces cooling fan speed, and the motor runs hotter until insulation fails [NEED_CITE: electrical compatibility standards for exported machinery]. I have seen units returned after a few months of apparently normal operation, only for the teardown to show heat-degraded windings. The pre-shipment voltage confirmation step exists specifically to prevent this category of failure.
Why Buyers Source This Model Through the Ready-Stock Channel
The ST-50 is stocked as a complete assembly with standardized mounting points, so final configuration is electrical rather than mechanical — this is what makes fast dispatch possible without cutting quality corners. Every unit goes through a live run with your specified banding material before crating, so the test record you receive matches the machine in the box. The operation manual ships in your agreed language, and the spare parts list identifies consumables by part number so reordering does not require a return to the quotation stage. Single-unit orders receive the same pre-shipment verification as full-line shipments because the testing protocol is tied to the machine serial number, not the order value.
Documentation & Verification
- Factory test record run on your specified banding thickness and substrate before dispatch
- Voltage and frequency confirmation sheet matched to your local grid standard
- Operation and maintenance manual in agreed language with illustrated parts diagram
- CE declaration of conformity covering machinery and low-voltage directives
- Spare parts list with consumable part numbers for direct reorder
Installation, Commissioning & Support
- Requires a single dedicated circuit matching the confirmed 220V or 380V supply
- Compressed air connection at 0.5–0.8 MPa from existing workshop compressor
- Arrives fully assembled — no mechanical reassembly needed on site
- First-run guidance covers glue temperature setting for your specific banding material
- Glue pot and feed mechanism cleaning schedule included in the manual
- Wear parts list provided with reorder intervals based on typical workshop use
What to Include With Your Inquiry
To confirm the correct configuration before dispatch, provide your local voltage and frequency, the plug standard used in your workshop, and the primary banding material you intend to run — PVC, ABS, or wood veneer. If the unit is destined for a job site rather than a fixed workshop, note the available air supply so we can flag any compressor shortfall before the machine arrives.
Frequently Asked Questions
Q: Is the ST-50 in stock, and what is the typical dispatch lead time?
A: The ST-50 is maintained as ready stock in the Shandong facility. Once your voltage, plug type, and control panel language are confirmed, the unit goes through final wiring and a live run test. Dispatch typically follows within several working days, depending on the current order queue and the complexity of any custom electrical configuration requested.
Q: Can I confirm voltage and plug type before the machine ships?
A: Yes — voltage and plug confirmation is a required step before the ST-50 leaves the factory. You provide your local supply specification, and the motor winding and power cable are matched accordingly. A written confirmation sheet is included in the shipment documentation so you can verify the match on arrival.
Q: What is the minimum order quantity?
A: The ST-50 is available as a single-unit order. There is no minimum quantity requirement, and a standalone purchase receives the same pre-shipment testing and documentation package as a multi-unit shipment. This makes the model suitable for individual workshops or contractors adding edge banding capability.
Q: How is the machine packed and what shipping options are available?
A: The ST-50 is crated for export with protective wrapping around the glue pot and control panel. Shipping options are quoted at the time of order based on your destination port or address. The 22 kg net weight and compact 50 × 50 × 47 cm dimensions keep freight costs proportional to the unit value.
Q: What support is available if a fault appears after installation?
A: Post-installation support begins with the operation manual and illustrated parts diagram shipped with the machine. Technical guidance is available remotely for troubleshooting. The spare parts list included with every ST-50 identifies consumables by part number, allowing direct reorder without a full quotation cycle.
