Description
Stocked for Dispatch — S-140 folding arm curve edge bander ready in warehouse, voltage confirmed before crate sealing to avoid on-site power mismatch.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | S-140 |
| Product Type | Folding Arm Curve Edge Banding Machine |
| Voltage | 220V |
| Total Power | 1.4kW |
| Air Source Pressure | 0.5–0.8MPa |
| Edge Banding Speed | 0–180mm/s |
| Overall Size | 96×62×88cm |
| Machine Size | 105×65×120cm |
| Weight | 88kg |
| Standard Suction Cup | 200×26mm |
| Edge Band Thickness | 0.4–2mm |
| Edge Band Width | 8–50mm |
| Breaking Method | Automatic tape break |
| Glue Pot Capacity | 1000ml |
| Gluing Type | Double-sided gluing |
| Function | Straight and curved dual purpose |
| Control Panel | Intelligent temperature control, speed adjustment, timer |
| Hot Air Device | Bottom-up hot air heating |
| Motor | Pure copper motor |
Application Suitability
| Application | Material or Output |
|---|---|
| Panel furniture edge banding | MDF, particleboard, plywood panels for study tables and office desks |
| Custom cabinet and wardrobe production | Curved and straight edge finishing on melamine and PVC-faced boards |
| Door and window frame trimming | Solid wood and composite profiles up to 50mm band width |
| Decoration and interior fit-out | Small-batch curved panel processing for retail and hospitality joinery |
| Wood product finishing | Edge sealing on shelves, tabletops, and display units |
Why Voltage Must Be Confirmed Before the Machine Leaves the Warehouse
We lock in the 220V compatibility check before dispatch so the S-140 powers on the first time at your facility.
I remember standing in a workshop in Southeast Asia watching an edge bander hum once and trip the breaker. The local grid ran 220V/60Hz but the machine had been wired for 380V. A transformer had to be air-freighted in while the carpentry crew sat idle and the client’s renovation schedule collapsed. That curve edge banding machine in stock fast delivery means nothing if the voltage is wrong when the crate opens. Confirming local power standards against the nameplate is the single most important step before any S-140 ships [NEED_CITE: voltage and frequency standards by export market].
In-Stock Availability and Dispatch Timing
The S-140 curve edge banding machine in stock fast delivery is held in our warehouse specifically for workshops that cannot wait through a production cycle. Single-unit orders ship directly once voltage, control panel language, and destination port are confirmed, keeping lead times to the logistics window rather than a manufacturing queue.
Ordering Simplicity for Single-Unit Buyers
Purchasing one S-140 should not require navigating a complex quotation process. Stocked units carry upfront shipping options so you can compare transit times and freight costs before committing. The order path runs from inquiry to dispatch confirmation with the electrical schematic and voltage confirmation document exchanged before the machine is crated [NEED_CITE: CE machinery directive requirements for industrial equipment].
How the S-140 Specifications Translate on the Workshop Floor
The 0.4–2mm edge band thickness range covers standard PVC, melamine, and thin veneer strips used across panel furniture production. At 8–50mm band width, operators can handle everything from narrow shelf edging to wider tabletop profiles without swapping tooling. The double-sided gluing system applies adhesive to both the board edge and the strip simultaneously, which matters when bonding curved radii where contact pressure varies. The 1000ml glue pot supports extended runs without frequent refills, reducing interruptions during a batch of curved cabinet doors. Intelligent temperature control on the panel lets the operator match the glue melting point to the specific banding material loaded, preventing cold joints on thicker PVC or scorching on veneer.
When the Wrong Configuration Stops Production
Buying an edge bander without matching the air pressure requirement to your compressor output means the automatic tape break cylinder will not fire cleanly, leaving ragged strip ends that require hand trimming. A suction cup undersized for your heaviest board stock allows the panel to drift during curved passes, producing visible glue lines that show up only after final assembly. Skipping the pre-shipment test record means you discover these issues on your floor instead of ours [NEED_CITE: common commissioning faults in imported woodworking machinery].
Why Source This S-140 From Our Stock
Four-stage QC runs on every unit before it enters the warehouse, covering incoming component inspection, in-process assembly checks, finished product testing, and pre-shipment verification. Voltage is confirmed against your declared local supply before crating, not assumed from the order sheet. Operation and maintenance manuals ship in the language your operators read, so commissioning does not stall on translation. Engineer-led configuration advice is available within 24 hours if you are unsure whether the S-140 suits your panel thickness mix or whether a higher-tier model better fits your daily volume.
Documentation & Verification
- CE declaration of conformity covering the S-140 curve edge bander
- ISO 9001 certificate for the manufacturing facility
- Electrical schematic with your confirmed 220V wiring layout
- Factory test record on your specified edge band thickness and width
- Operation manual translated into your operator’s language
- Packing photographs taken before crate closure
Installation, Commissioning & Support
- Requires a dedicated 220V circuit rated above the 1.4kW total power draw
- Air compressor must deliver 0.5–0.8MPa to operate the automatic tape break and suction cup
- Machine arrives assembled at 105×65×120cm, requiring only bench placement and utility hookup
- Intelligent temperature control panel calibrated during pre-shipment test for your chosen glue type
- Spare parts list included for suction cup, glue pot liner, and heating element reorder
- Daily glue pot cleaning recommended to maintain double-sided gluing consistency
What We Need to Move Your Order Forward
Share your local voltage and frequency so we can confirm the S-140 matches your grid before it leaves our floor. Tell us the primary board material and edge band thickness you run most often so the pre-shipment test uses realistic stock. If your operators need the control panel in a specific language, state that upfront and the manual will follow in the same language.
Frequently Asked Questions
Q: Is this S-140 model in stock and how fast can it ship?
A: The S-140 folding arm curve edge banding machine is held in ready stock for single-unit and small-quantity orders. Dispatch follows once your voltage, language preference, and destination details are confirmed, typically within a short window rather than a production cycle lead time.
Q: What voltage and frequency does the S-140 support, and can it be customized?
A: The standard stocked S-140 runs on 220V. Before dispatch, we verify this against your local supply specifications including frequency to ensure the pure copper motor and heating elements operate correctly on arrival without external transformers.
Q: How do I handle both straight and curved edges with this single machine?
A: The S-140 is built as a straight and curved dual-purpose unit. The folding arm and 200×26mm suction cup hold the board steady while the operator guides curved profiles manually. The bottom-up hot air heating maintains adhesive tack through the curve radius.
Q: What edge band thickness and width range does the S-140 accept?
A: The machine handles edge band thickness from 0.4mm to 2mm and width from 8mm to 50mm. This covers standard PVC, melamine, and thin veneer strips used across panel furniture, cabinet, and general woodworking applications.
Q: Is assembly required on arrival, and what support is provided for setup?
A: The S-140 ships assembled. You connect it to your 220V supply and air compressor, then run a test piece. An operation and maintenance manual in your agreed language is included, and installation guidance is available if your team encounters setup questions.
