Description
Ready Stock Assurance — DW-3600GF automatic PVC edge bander ships with pre-verified voltage configuration and matching plug, eliminating the two-week downtime trap I once watched a Vietnamese cabinet factory endure when a 380V machine hit a 220V grid without warning.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | DW-3600GF |
| Product Type | Automatic PVC Edge Banding Machine |
| Rated Power | 4.9 kW |
| Voltage & Frequency | 380V Three-Phase Four-Wire (50Hz or 60Hz to be confirmed per destination) |
| Overall Dimensions (L×W×H) | 2200×650×1250 mm |
| Net Weight | 320 kg |
| Feed Speed | 0–14 m/min |
| Edge Banding Type | Straight Edge Banding |
| Edge Band Height Range | 0–50 mm |
| Edge Band Thickness Range | 0.3–3 mm |
| Minimum Panel Length | 200 mm |
| Trimming Motor Power | 800W×2 |
| Trimming Spindle Speed | 24000 r/min |
| Polishing Motor Power | 400W×2 |
| Edge Banding Motor Power | 160W |
| Transmission Motor Power | 180W |
| Air Supply Requirement | 0.4–0.6 MPa |
| Standard Functions | Gluing, Front and Rear Trimming, Scraping, Polishing, Vacuuming |
| Language Options | Chinese and English standard; other languages available on request |
| Certification | CE, ISO 9001 |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom furniture panel edge banding | MDF and particleboard with PVC edge band |
| Cabinet door and carcass finishing | Plywood panels with 0.3–3 mm PVC strip |
| Small workshop straight-edge processing | Melamine-faced board with veneer or PVC banding |
| Joinery startup production launch | Single-machine straight-edge workflow at moderate volume |
Why the Voltage Question Must Come Before the Dispatch Date
Every Automatic Edge Banding Machine in stock leaves the floor only after the buyer signs an electrical confirmation sheet matching local grid specs.
I once shipped an edge bander to a furniture factory outside Ho Chi Minh City without a second voltage check. The local electrician wired it into a 380V circuit that turned out to be a different phase configuration. The main breaker tripped instantly, and the entire production line sat idle for two weeks while a transformer was sourced. That workshop lost more time to one unchecked spec than the machine would have taken to pay for itself. When you order an Automatic Edge Banding Machine in stock from a ready-inventory pool, speed means nothing if the electrical interface is wrong on arrival [NEED_CITE: voltage and frequency standards by export market].
Dispatch Speed Without the Electrical Surprise
Keeping an Automatic Edge Banding Machine in stock means the mechanical assembly is complete and tested. What still requires confirmation is the destination electrical standard — plug type, frequency, and phase wiring. Before any crate is sealed, the buyer receives an electrical confirmation document listing the exact voltage and frequency the machine has been set to. This step adds a short window to the order cycle but prevents the multi-week stall that happens when a machine arrives and the workshop electrician cannot energize it.
Stock Availability and Single-Unit Ordering
Workshops scaling from manual edge banding rarely need a container load. The DW-3600GF is held as a single-unit ready stock item, meaning a joinery startup or a small cabinet maker can order one machine and have it dispatched without waiting for a batch run to fill. This matters when a new contract requires edge-banded panels within a month and the lead time for a built-to-order machine would consume most of that window [NEED_CITE: typical lead times for built-to-order versus stocked woodworking machinery].
Reading the Spec Sheet Against Your Workshop Reality
The 0–14 m/min feed speed range gives operators room to slow down for thick PVC banding on particleboard, where glue penetration needs a slightly longer open time, and speed up for thin veneer on MDF where the band conforms quickly. The 24000 r/min trimming spindle speed is set to produce a clean shear cut on PVC up to 3 mm thick; running it slower risks tearing the band edge rather than slicing it. The six-station sequence — gluing, front and rear trimming, scraping, polishing, and vacuuming — covers the full straight-edge finishing cycle in a single pass, so panels move directly to drilling or assembly without secondary edge work. The 2200 mm footprint fits against a wall in workshops where floor space is shared with a sliding table saw and a boring machine.
The Hidden Cost of Skipping Pre-Shipment Verification
When an edge bander arrives without a factory test record matched to the buyer’s actual panel thickness and band material, the first week of production becomes an unplanned commissioning exercise. Glue temperature, feed speed, and trimming depth all need dialing in from scratch. Operators unfamiliar with the control language compound the delay, producing scrap panels while parameters are adjusted by trial and error. I have seen this phase consume an entire batch of raw board before the machine settles into consistent output [NEED_CITE: commissioning challenges for imported woodworking machinery without pre-shipment testing].
Why Buyers Source This Model Here
The DW-3600GF is manufactured in-house with a proprietary cutting mechanism covered by patent, not assembled from third-party sub-components. Voltage customization from 110V to 440V is a standard option, not a special request. A four-stage quality control process — incoming material, in-process, finished product, and pre-shipment — runs on every unit before it is crated. The control panel language is configurable so that the operator reading the screen on day one understands every parameter label. Engineer-led configuration recommendations are delivered within 24 hours of an inquiry, meaning the buyer gets a written specification match rather than a generic catalog page.
Documentation & Verification
- CE declaration of conformity covering the DW-3600GF safety and electrical requirements
- Factory test record run on buyer-specified panel thickness and PVC band width before crating
- Electrical schematic confirming voltage, frequency, and plug type for the destination country
- Operation and maintenance manual translated into the agreed operator language
- Spare parts list with part numbers matching the shipped configuration
Installation, Commissioning & Support
- Requires a dedicated 380V three-phase circuit with a minimum 16A breaker to handle the 4.9 kW rated draw
- Footprint of 2200×650 mm allows placement against a workshop wall with rear access for maintenance
- Arrives fully assembled; operator connects compressed air supply at 0.4–0.6 MPa before first run
- Glue pot temperature and feed speed calibrated during commissioning for the buyer’s specific PVC band thickness
- Trimming and scraping stations adjusted on-site to the buyer’s panel material — MDF, particleboard, or plywood
- Spare trimming cutters and polishing wheels included in the initial shipment for early-stage replacements
Before You Request a Quote
Send your panel material type and typical thickness range, the PVC or veneer band thickness you run most often, and your workshop’s confirmed voltage and frequency. If you are replacing a manual edge banding station, note your current daily panel count so the feed speed setting can be matched. Buyers planning a full line should also share existing equipment models so throughput between stations stays balanced.
Frequently Asked Questions
Q: What voltage and plug options are available for my country?
A: The DW-3600GF is configurable from 110V to 440V across 50Hz and 60Hz systems. Before dispatch, you receive an electrical confirmation sheet listing the exact voltage, frequency, and plug type. We match this to your local grid specification so the machine powers on without a transformer or adapter on arrival.
Q: Is this model in stock and how fast can it ship?
A: The DW-3600GF is held as ready stock in our warehouse. After electrical confirmation and pre-shipment testing, dispatch follows within a short window. Exact timing depends on destination port and shipping line availability, which we quote at the order stage.
Q: Can I order a single unit, or is there a minimum order quantity?
A: Single-unit orders are standard for this model. There is no minimum order quantity. This suits workshops adding their first automatic edge bander or replacing a manual station without committing to a full production line purchase.
Q: What panel materials and edge band thickness does the DW-3600GF handle?
A: The machine processes MDF, particleboard, and plywood panels with PVC or veneer edge banding from 0.3 to 3 mm thick. Band height coverage is 0–50 mm. The six-station sequence handles gluing through polishing in one pass for straight-edge applications.
Q: What spare parts are included, and how do I order replacements?
A: The initial shipment includes a spare parts list matched to your machine’s configuration, covering consumable items like trimming cutters and polishing wheels. Replacement parts are ordered by part number and shipped directly from the factory to your workshop address.
