Description
Stocked for immediate dispatch — the ZDS-3600 Full Auto Bevel-Straight Edge Banding Machine is floor-tested, voltage-confirmed, and ready to ship with documentation matched to your facility before it leaves our loading bay.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | ZDS-3600 |
| Product Type | Full Auto Bevel-Straight Edge Banding Machine |
| Edge Banding Speed | 0–12 m/min (variable feed) |
| Panel Thickness Range | 18–45 mm |
| Bevel Angle Range | 30°–90° |
| Total Installed Power | 8.9 kW |
| Supply Voltage | 380 V (50 Hz / 60 Hz to be confirmed per destination) |
| Working Air Pressure | 0.5–0.7 MPa |
| Glue Pot Capacity | 4000 ml |
| Pre-Milling Motor | 2.2 kW |
| Trimming Motors | 2.2 kW × 2 (high-speed, 4-edged alloy cutter heads) |
| Edge Trimming Motor | 0.12 kW |
| Polishing Motors | 0.37 kW × 2 (upper and lower) |
| Glue Pot Heating | 2 kW |
| Oven Lamp Heating | 2 kW × 2 |
| Slotting Motor | 65 W |
| Control System | PLC with panel operation |
| Pressure Beam | One-piece aluminum alloy, digital display height adjustment |
| Overall Dimensions (L×W×H) | 3320 × 650 × 1180 mm |
| Net Weight | 450 kg |
Application Suitability
| Application | Material or Output |
|---|---|
| Cabinet door straight and beveled edge banding | MDF and plywood with PVC or veneer edge strips |
| Custom furniture panel finishing | Particleboard with melamine-faced surfaces |
| Small-batch decorative bevel profiles | Solid wood panels requiring 30°–90° shaped edges |
| Short-run office and residential casework | Laminated board with standard straight edge requirements |
Why Voltage Confirmation Must Come Before Dispatch
A Bevel-Straight Edge Banding Machine in stock is only useful if it runs on the power supply waiting for it at your workshop. Every ZDS-3600 ships with a documented voltage and frequency match to the buyer’s local electrical standard. I have watched cabinet shops take delivery of 380 V / 50 Hz equipment only to discover their facility runs 440 V / 60 Hz — the machine sat idle for weeks while transformers were sourced and rewired. That delay is avoidable when voltage confirmation is part of the order process rather than an afterthought at the dock [NEED_CITE: voltage and frequency standards by export market].
Dispatch Readiness Without the Guesswork
The ZDS-3600 is held in ready-stock configuration and can be prepared for shipment once the destination voltage, control language, and panel thickness range are confirmed. This Bevel-Straight Edge Banding Machine in stock status means typical multi-week production lead times are eliminated for buyers who need a machine on the floor quickly.
Matching the Machine to Your Actual Substrate
Before any unit leaves the floor, the edge speed, glue temperature, and feed pressure are adjusted to the specific board material the buyer will be running. Particleboard behaves differently from MDF under the pre-milling station, and PVC edge banding requires a different glue pot temperature profile than wood veneer. Skipping this step is how workshops end up with visible glue lines and inconsistent trim quality during their first production runs [NEED_CITE: substrate-specific edge banding parameters].
What the Function Stations Mean for Daily Output
The ZDS-3600 packs pre-milling, preheating, gluing, trimming, edge scraping, clear glue removal, and dual-motor polishing into a single pass. For a small workshop, this means one operator feeds panels and receives finished edges without moving workpieces between separate machines. The 4000 ml glue pot capacity reduces mid-run refill stops, which matters when you are pushing through a batch of cabinet sides and do not want the glue cooling down between top-ups.
Reading the Specifications Against Your Production Needs
The variable 0–12 m/min edge speed gives operators room to slow down for difficult substrates — thick particleboard with coarse cores needs a lower feed rate so the pre-milling cutters can clean the edge before the glue station engages. The 30°–90° bevel range, driven by a dedicated milling motor, allows a single machine to handle both standard straight cabinet edges and decorative angled profiles for visible furniture faces. Two high-speed trimming motors with 4-edged alloy cutter heads produce a clean cut on both top and bottom edges simultaneously, reducing the manual scraping needed downstream. The one-piece aluminum alloy pressure beam with digital height display removes the trial-and-error of manual beam adjustment when switching between 18 mm shelving and 45 mm worktops [NEED_CITE: edge banding tolerance requirements for panel assembly].
What Happens When Configuration Is Skipped
Workshops that order an edge bander without specifying their actual panel materials often discover the problem only after the first production run. Glue that cures properly on MDF may not bond correctly to particleboard at the same temperature and feed speed, resulting in edge banding that lifts during transport or assembly. Machines shipped without confirmed voltage arrive as dead weight until an electrician rewires the panel, and control interfaces in an unfamiliar language stall commissioning while the operator searches for translated manuals. These are not defects — they are configuration gaps that surface after the machine is already on your floor.
Why Source This Machine Through This Channel
The ZDS-3600 is stocked and available for single-unit orders with shipping options quoted at the time of inquiry, so you know the total landed timeline before committing. Voltage is confirmed from 110 V to 440 V as a standard part of the order process, not a special request. Each unit ships with an operation and maintenance manual in the buyer’s agreed language, along with a spare parts list that covers the immediate maintenance window. Pre-shipment testing is documented with a factory verification record specific to your panel thickness range and edge banding material. The full function sequence — from pre-milling through polishing — means this is the only edge processing machine a growing workshop needs to purchase at this stage.
Documentation & Verification
- CE declaration of conformity covering the ZDS-3600 edge banding machine
- Factory test record run on buyer-specified panel thickness and edge material before dispatch
- Electrical schematic with confirmed voltage and frequency for destination country
- Operation and maintenance manual printed in the buyer’s agreed control language
- Spare parts list matching the ZDS-3600 configuration shipped
Installation, Commissioning & Support
- 3320 × 650 mm footprint requires a level concrete floor with clearance on the infeed and outfeed sides
- 8.9 kW total power draw requires a dedicated 380 V circuit with confirmed 50 Hz or 60 Hz supply
- Machine arrives fully assembled; pressure beam and guide rails require alignment check after transport
- First-run commissioning includes glue pot temperature calibration for the specified edge banding material
- PLC panel language set to operator preference before shipment to avoid on-site translation delays
- Trimming cutter heads and polishing wheels listed in spare parts for routine replacement intervals
Before You Request a Quote
Send your primary panel material type and thickness range, the edge banding material you plan to run, and your facility voltage and frequency. If you are replacing an existing machine, note the current feed speed and any edge quality issues you are seeing. This information allows a stock match and voltage confirmation to be completed before a formal quote is issued.
Frequently Asked Questions
Q: Is the ZDS-3600 currently in stock and how quickly can it ship?
A: The ZDS-3600 is held as ready stock for fast dispatch. Once the buyer confirms destination voltage, frequency, and control panel language, the unit goes through a pre-shipment test and is prepared for loading. Single-unit orders are accepted, and shipping options are quoted at the time of inquiry so you can plan your floor schedule around a known delivery window.
Q: How do you confirm the voltage matches my workshop before shipping?
A: Voltage and frequency are confirmed during the order process before the machine is prepared for dispatch. The ZDS-3600 supports configurations from 110 V to 440 V, and the electrical schematic included in the documentation package reflects the exact supply specification for your country. This prevents the common situation where equipment arrives and cannot be powered on without costly rewiring.
Q: What languages are available for the PLC control panel?
A: The control panel language is specified at the time of order and configured before the machine leaves the factory. This ensures the operator can read all menu options, error codes, and parameter settings from the first day of production. The operation manual is also provided in the same agreed language to support commissioning and daily use.
Q: What spare parts ship with the machine?
A: Each ZDS-3600 ships with a spare parts list covering high-wear items such as trimming cutter heads, polishing wheels, and glue pot components relevant to the specific configuration ordered. Replacement parts can be requested after delivery using the same parts list, and the documentation package includes guidance on replacement intervals based on typical production use.
Q: Can I order just one unit for my workshop?
A: Single-unit orders are standard for the ZDS-3600 on this platform. The ordering process is designed for speed: confirm your voltage, language, and panel requirements, receive a shipping quote, and the machine is prepared for dispatch. There is no minimum order quantity requirement for ready-stock units.
