Description
Voltage-Verified Dispatch — every ST-50 Semi-Automatic Edge Bander ships only after written confirmation of your workshop voltage, frequency, and plug type.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | ST-50 |
| Product Type | Semi-Automatic Edge Bander |
| Rated Power | 1000 W |
| Edge Power | 20 W |
| Voltage & Frequency | 220 V / 380 V / customization (frequency to be confirmed at order) |
| Edge Banding Height | 0–50 mm |
| Edge Banding Thickness | 0.3–3 mm |
| Minimum Sheet Width | 3 cm |
| Minimum Sheet Length | 25 cm |
| Glue Pot Capacity | 1000 ml |
| Air Source Pressure | 0.5–0.8 MPa |
| Product Size (L×W×H) | 50×50×47 cm |
| Net Weight | 22 kg |
| Assembly State | Benchtop / portable unit |
| Key Features | Curved and straight edge banding; plug options (EU, USA, AU, UK); language options (Chinese, English, customizable to Spanish or other languages) |
Application Suitability
| Application | Material or Output |
|---|---|
| Small-batch cabinet door edging | MDF and particleboard panels with PVC or melamine strip |
| On-site furniture repair and touch-up | Solid wood board and ecological board, straight and curved profiles |
| Custom joinery prototyping | Plywood offcuts and narrow stock down to 3 cm width |
| Home decoration contractor fieldwork | Ecological board and veneer banding on installed cabinetry |
Why Voltage Must Be Confirmed Before You Click "Buy"
A Semi-Automatic Edge Bander in stock is only useful if it runs on your workshop’s power supply from day one.
I once watched a whole production line sit idle for two weeks in Surabaya because a benchtop bander arrived with a 440 V motor while the shop ran 380 V. The transformer sourcing ate into the project timeline and the contractor lost face with his client. With compact machines, buyers often assume voltage is standard — it is not. Export markets differ widely in frequency and plug geometry [NEED_CITE: voltage and frequency standards by export market]. The ST-50 ships with confirmed voltage and a region-matched plug so you plug in and run the Semi-Automatic Edge Bander in stock without an extra adapter hunt.
Dispatch Readiness Without the Guesswork
When a small workshop needs a Semi-Automatic Edge Bander in stock quickly, the bottleneck is rarely the machine itself — it is the paperwork and configuration check that usually delays shipment. This unit leaves the warehouse with voltage, plug type, and control-panel language confirmed against your order sheet. Dispatch lead time is quoted at the point of order, and single-unit purchases are accepted without a minimum-order negotiation.
Straight and Curved Edges in One Benchtop Footprint
Most portable banders handle only straight runs, forcing operators to hand-trim curved panels afterward. The ST-50 performs both curved and straight edge banding on the same base, which matters when a cabinet door has a radiused corner or a custom shelf follows a wall contour. The 0.3–3 mm thickness window accepts PVC, veneer, and melamine strips, keeping material sourcing simple for shops that do not want to stock multiple banding grades [NEED_CITE: edge banding material compatibility for small-scale furniture production].
Reading the Spec Sheet Against Real Panel Work
The 25 cm minimum sheet length and 3 cm minimum width mean you can edge small offcuts and repair pieces that most benchtop units simply cannot feed. In practice this matters for furniture repair contractors who receive damaged cabinet sides and need to re-band narrow rails. The 1000 ml glue pot supports sustained small-batch runs without frequent refill stops, and the 0.5–0.8 MPa air pressure range aligns with standard workshop compressors rather than requiring a dedicated high-pressure line. Edge banding height of 0–50 mm covers the majority of panel thicknesses encountered in MDF and plywood cabinet work, and the ±tolerance of the glue application is governed by the operator feed rate rather than a motorized conveyor — an important distinction when comparing against full-automatic models.
What Happens When Configuration Is Skipped
Ordering a benchtop bander without confirming the glue type compatibility is the second most common pitfall after voltage. If your shop runs PUR adhesive and the pot is configured for standard EVA hot melt, you face either a pot swap or a material change — both cost time [NEED_CITE: EVA versus PUR hot melt requirements in edge banding]. Similarly, receiving an operation manual in a language your operator cannot read stalls commissioning by days. These are avoidable when the pre-dispatch checklist covers adhesive type, manual language, and plug geometry alongside voltage and frequency.
Why Procurement Teams Source This Model Here
In-house manufacturing with verified component sourcing means the ST-50 is built, tested, and dispatched under one roof rather than assembled from traded-in sub-units. Four-stage quality control covers incoming material, in-process assembly, finished-product function, and pre-shipment verification — with a test record generated on your specified panel material. Voltage customization is treated as standard order procedure, not an afterthought. Single-unit orders are fulfilled from ready stock alongside larger batches, so a workshop scaling from one benchtop unit to a future full line does not need to re-qualify a new supplier. Engineer-led configuration recommendations are provided within one working day of inquiry.
Documentation & Verification
- Factory test record on your specified panel thickness and banding material before dispatch
- Electrical schematic confirming ordered voltage, frequency, and plug configuration
- Operation and maintenance manual in agreed language at time of shipment
- CE declaration of conformity and ISO 9001 certificate included with shipping documents
- Spare parts list matched to the ST-50 bill of materials
Installation, Commissioning & Support
- Benchtop placement requires a stable workbench rated for at least 30 kg to absorb vibration during curved-edge feed
- Dedicated circuit matching confirmed voltage (220 V or 380 V) with proper grounding and a 1000 W load margin
- Arrives fully assembled — mount to bench, connect compressed air at 0.5–0.8 MPa, fill glue pot, and run a test strip
- First-run parameter guidance covers glue temperature, feed speed, and banding pressure for your chosen material
- Operator training covers both straight and curved edge techniques, including minimum 3 cm width handling
What to Include in Your Inquiry
Provide your workshop voltage and frequency, plug type, preferred operation-manual language, and the panel materials and thicknesses you plan to run. If you need a pre-dispatch test on a specific board and banding combination, attach a material sample specification so the factory can match glue temperature and feed rate to your actual production conditions.
Frequently Asked Questions
Q: Which voltage and plug option should I select for my country?
A: Confirm your workshop supply voltage and frequency with your electrician before ordering. The ST-50 is available in 220 V and 380 V configurations with EU, USA, AU, and UK plug options. Share your location and supply details at inquiry so the correct combination is built and verified before dispatch.
Q: What banding materials does the ST-50 support within the 0.3–3 mm range?
A: The unit handles PVC, veneer, and melamine edge banding strips between 0.3 mm and 3 mm thick. Confirm your adhesive type at order — the glue pot is compatible with standard EVA hot melt. If you plan to use specialty adhesives, flag this during inquiry so compatibility can be verified.
Q: How long does dispatch take and what shipping options are available?
A: Ready-stock units are prepared for dispatch once voltage, plug, and language configuration are confirmed. Single-unit orders ship via express courier or sea freight depending on urgency. Shipping options and estimated transit are quoted at the time of order confirmation.
Q: Can I start with one unit and add more machines later?
A: Yes. The ST-50 is a single-unit purchase with no minimum order. As production volume grows, the product family extends to full-automatic edge banders and complete panel processing lines from the same manufacturer, simplifying future expansion without switching suppliers.
Q: What arrives in the package besides the machine?
A: Each shipment includes the ST-50 unit, an operation and maintenance manual in your agreed language, a spare parts list, and standard wear items. Glue is not included — confirm your preferred adhesive type so the factory can advise on the correct specification for your panel material.
