Description
Fast Dispatch Ready — stock 802 units ship only after voltage, frequency, and language are verified against your workshop’s actual electrical supply.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | 802 |
| Product Type | Automatic Edge Banding Machine |
| Edge Type | Straight line |
| Rated Voltage | 220V (configurable 110V–440V per order) |
| Rated Power | 4kW |
| Trimming Power | 800W × 2 |
| Polishing Power | 180W × 2 |
| Suction Power | 1200W |
| Heating Power | 1000W (5–10 min heat-up) |
| Feed Speed | 0–10 m/min |
| Conveyor Belt Speed | 0–10 m/min |
| Strip Thickness Range | 0.5–2.5 mm |
| Sheet Thickness Range | 10–50 mm |
| Glue Pot Capacity | 4000 ml |
| Rated Air Pressure | 0.4–0.6 MPa |
| Pressure Beam | One-piece beam, double rows of pressure wheels |
| Conveyor Belt Material | Silicone |
| Belt Breaking Method | Pneumatically controlled |
| Control Panel | Digital glue pot temperature display, independent switches |
| Extendable Support | Fluent strips for large plate stability |
| Overall Dimensions | 130 × 65 × 75 cm |
| Machine Weight | 150 kg |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom cabinet door edge banding | MDF and particleboard with PVC or melamine strips |
| Small-batch wardrobe panel processing | Plywood panels with veneer or ABS edge banding |
| Joinery workshop straight-line edging | Solid wood panels up to 50 mm thickness |
| Furniture startup production runs | Laminated board with 0.5–2.5 mm strip thickness |
Why Voltage Verification Must Happen Before You Pay
Every automatic edge banding machine in stock at the 802 tier leaves the warehouse only after the buyer’s local voltage and frequency are confirmed in writing.
I have watched a fully automatic edge bander sit idle on a factory floor in Dubai for three weeks because the motor was wired for 380V while the site ran 415V three-phase. The inverter tripped the moment the feed motor started, and the entire line shut down until a replacement drive arrived by air freight. That hotel furniture deadline nearly collapsed over a parameter that takes two minutes to check [NEED_CITE: voltage and frequency standards by export market]. The 802 ships with a rated voltage of 220V as standard, yet every order goes through a pre-dispatch electrical confirmation step so the motor winding, control transformer, and heating element all match what is actually on your workshop wall.
Stock Availability Without the Guesswork
The 802 is held as an automatic edge banding machine in stock for buyers who cannot wait through a full production cycle. Units are prepared for dispatch once the electrical parameters and documentation language are agreed. This matters most for joinery workshops picking up a single machine to fill an immediate gap in their line, or cabinet shops that have just won a contract and need edging capacity running within days rather than weeks. The compact footprint — 130 × 65 × 75 cm — means the 802 fits into an existing bay without rearranging other stations.
What Fast Dispatch Actually Includes
Fast dispatch is not just a machine on a pallet. Each 802 order is accompanied by a pre-shipment test record showing the unit ran through its full function sequence — glue heating, feed, trimming, polishing, and dust extraction — before crating. Packing photographs are shared with the buyer before release so there are no surprises at the receiving dock. The operation manual is supplied in the buyer’s agreed language, and the spare parts list covers consumables for the first maintenance cycle. This is what separates a stocked machine from a rushed one [NEED_CITE: typical pre-shipment inspection practices for woodworking machinery exports].
How the Specs Translate on the Workshop Floor
The 4000 ml glue pot is sized to sustain continuous runs without frequent refills, which matters when you are edging a batch of cabinet sides back to back. A smaller pot would force the operator to stop, let the new glue melt, and lose temperature stability mid-run. The 0–10 m/min variable feed speed lets you slow down for thick 2.5 mm PVC on curved-grain MDF or speed up for thin 0.5 mm melamine on standard particleboard. Trimming at 800W per side gives enough torque to cut cleanly through the thicker strip materials without stalling, while the 180W polishing motors finish the edge flush without burning the substrate. The one-piece pressure beam with double rows of silicone pressure wheels keeps panels flat against the conveyor without leaving scuff marks — a detail that only matters when you are edging pre-finished board and cannot afford surface damage before assembly.
The Cost of Skipping the Details
A machine that arrives with the wrong voltage does not just sit idle — it blocks the floor space, delays the project schedule, and erodes the customer relationship. I have seen workshops attempt to run a 220V motor through a step-down transformer as a workaround, only to find the heating element underperforms and glue adhesion fails on the first hundred panels. Similarly, an operation manual written in a language the operator cannot read means the glue pot temperature is never set correctly, the trimming depth is off, and edge quality drifts until someone figures it out by trial and error [NEED_CITE: common commissioning failures in exported woodworking machinery]. These are not engineering defects. They are procurement oversights that a disciplined dispatch process prevents entirely.
What This Warehouse Does Differently
Voltage confirmation is a formal step, not a checkbox buried in the invoice. Every 802 is tested under load before crating, with a written record provided to the buyer. Customization of voltage from 110V to 440V is treated as standard procedure, not an exception requiring a special order. Documentation — from electrical schematics to the spare parts list — is prepared in the buyer’s language before the machine ships. The 802 product family covers entry-level through to full-function configurations, so a workshop that starts with this stock model can scale to higher-capacity units from the same supplier without relearning a new control layout or sourcing spare parts from a different supply chain.
Documentation & Verification
- CE declaration of conformity covering the 802 automatic edge banding machine
- Electrical schematic confirming voltage and frequency matched to your site supply
- Pre-shipment test record on your specified strip and sheet thickness range
- Operation and maintenance manual supplied in the buyer’s agreed language
- Spare parts list covering trimming blades, polishing wheels, and conveyor belt sections
- Packing photographs provided before crate release for buyer confirmation
Installation, Commissioning & Support
- Requires a dedicated 4kW circuit at the confirmed voltage with appropriate breaker rating
- Compressed air supply at 0.4–0.6 MPa must be available at the machine inlet
- Overall 130 × 65 × 75 cm footprint fits standard workshop bays; allow clearance for the extendable fluent strip support
- Glue pot heat-up takes 5–10 minutes; first-run parameter setting covers feed speed and trimming depth
- Silicone conveyor belt and pressure wheel inspection included in the daily maintenance routine
- Pneumatic belt breaking mechanism requires periodic seal checks as part of scheduled servicing
Before You Request a Quote
Share your workshop’s exact voltage and phase configuration, the panel materials you process most often, and the strip thickness range your projects demand. If you are replacing an existing edge bander, note its current feed speed and any quality issues you are seeing on the finished edge. This lets the configuration match the machine to your actual production conditions before it leaves the warehouse.
Frequently Asked Questions
Q: Is the 802 in stock and what is the dispatch lead time?
A: The 802 is held as an automatic edge banding machine in stock and prepared for dispatch once voltage, language, and documentation details are confirmed. Lead time covers the pre-shipment test and verification steps rather than full manufacturing. Exact dispatch timing is provided at the quotation stage based on current warehouse availability.
Q: What voltage options are available and how is local voltage confirmed?
A: The 802 supports voltage configuration from 110V to 440V. Before dispatch, you provide your site’s voltage, phase, and frequency, and these are verified against the machine’s electrical build. An electrical schematic confirming the match is included in the shipment documentation.
Q: Can the control panel and manual be provided in my local language?
A: Yes. The operation and maintenance manual is prepared in the buyer’s agreed language before shipping. The digital control panel labels can also be matched to the operator’s language as part of the pre-dispatch configuration process.
Q: What is included in the shipment besides the machine?
A: Each shipment includes the operation manual, spare parts list, electrical schematic, pre-shipment test record, and packing photographs. The spare parts list covers immediate consumables so you can plan reorders without waiting for a second delivery.
Q: How do I arrange single-unit ordering and what shipping options are available?
A: The 802 supports single-unit orders. Shipping options are quoted upfront based on destination, and the compact 150 kg weight with 130 × 65 × 75 cm dimensions keeps freight manageable. Your quotation will include available shipping methods and estimated transit timing.
