Description
Ready-stock dispatch — voltage and plug confirmed in writing before your dust-free sliding table saw leaves the factory, so it runs on arrival.
Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | Dust-Free Double Saw Sliding Table Saw |
| Total Power | 6200W |
| Main Saw Power | 3000W |
| Main Saw Speed | 3800 r/min |
| Main Saw Blade Diameter | 200mm |
| Sub Saw Power | 2000W |
| Sub Saw Speed | 13000 r/min |
| Vacuum Cleaner Power | 1200W |
| Maximum Cutting Length | 2.44m |
| Maximum Cutting Thickness | 40mm |
| Net Weight | 22KG |
| Machine Dimensions | 500×300×380mm |
| Dust Extraction | Integrated 1200W vacuum cleaner |
| Assembly State | Portable, single-unit |
| Plug Options | EU, USA, AU, UK |
| Language Options | Chinese, English; custom language available |
| Control Panel | Multilingual configurable |
| Standards | CE, ISO 9001 |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom furniture panel sizing | MDF and melamine-faced particleboard up to 40mm |
| Cabinet component cutting | Plywood and laminated boards requiring chip-free edges |
| Small joinery shop production | Solid wood panels for frame and door components |
| On-site fit-out trimming | Pre-finished panels trimmed in dust-controlled environments |
| Workshop transitioning from manual saws | Repeatable straight cuts on standard 2.44m sheet stock |
Why the Voltage Question Must Come Before the Dust-Free Sliding Table Saw in stock
We confirm plug type, voltage, and frequency in writing before dispatch so the machine powers on without a transformer.
Years ago I watched a sliding table sit idle in a Lima workshop for three weeks because the motor was wound for 380V/50Hz while the local supply was 220V/60Hz. The spindle burned within minutes of first power-on, and the replacement transformer had to cross the Pacific by sea. That kind of mistake does not just cost freight — it costs the customer’s production schedule and trust [NEED_CITE: voltage and frequency standards by export market]. Now every single-unit order for a Dust-Free Sliding Table Saw in stock goes through a two-step electrical confirmation before it ships.
Stock Availability and Dispatch Timing
This Dust-Free Sliding Table Saw in stock ships as a complete single unit — main saw, scoring saw, and 1200W vacuum packed together. Workshop owners who need one machine to start cutting panels this month, not next quarter, can place a single-unit order and receive a confirmed dispatch date immediately. No minimum order quantity applies.
Plug, Voltage, and Language Configured Before Dispatch
Choosing from EU, USA, AU, or UK plug standards is the baseline. Beyond that, we verify your local voltage and frequency against the motor winding before the crate closes, and the multilingual control panel can be configured to Spanish, French, or other languages so your operators read the interface from day one [NEED_CITE: multilingual industrial control panel standards]. The machine arrives ready for the local grid and the local workforce.
Reading the Specs That Matter for Panel Cutting
The 3000W main saw at 3800 r/min with a 200mm blade handles through-cuts on MDF, plywood, and particleboard up to 40mm thick. The 2000W scoring saw spinning at 13000 r/min scores the bottom face of laminated panels before the main blade exits, which is what prevents chipping on melamine and veneer surfaces. When cutting 18mm melamine particleboard — the most common cabinet stock — the scoring saw speed relative to feed rate determines whether the bottom edge stays clean or splinters. The integrated 1200W vacuum captures dust at the blade housing rather than relying on a remote collector, so the 22KG portable footprint stays uncluttered and the unit can be moved between workstations or taken to a job site.
The Hidden Cost of Skipping Voltage Confirmation
A machine that arrives with the wrong winding becomes dead weight on the workshop floor. Sourcing a step-up or step-down transformer locally adds cost, introduces a point of failure, and may still cause overheating if frequency mismatches alter motor speed. For small shops that bought the saw to meet a delivery deadline, those extra weeks of downtime ripple through every downstream order [NEED_CITE: industrial motor failure causes related to voltage mismatch]. The damage to a workshop’s reputation is harder to fix than the motor.
Why Purchase This Saw Through Our Ready-Stock Channel
In-house manufacturing with patented cutting mechanisms means the dual-saw assembly is built and tested under one roof, not sourced from separate vendors and bolted together. Four-stage QC — incoming material, in-process, finished product, pre-shipment — includes a factory test record that verifies both the main and scoring saw run within tolerance before your unit is crated. Voltage, plug, and control panel language are confirmed per order, not assumed by region. Single-unit orders are standard; there is no container-load requirement. Engineer-led configuration happens before the quotation, so the saw you receive matches the panels you actually cut.
Documentation & Verification
- CE declaration of conformity covering the dual-saw and vacuum assembly
- Electrical schematic confirming your voltage and plug type before dispatch
- Factory test record with main and scoring saw run data on specified panel thickness
- Operation and maintenance manual delivered in your chosen language
- Pre-shipment photographs showing the configured plug and control panel
- Packing documentation with customs-ready paperwork for your destination port
Installation, Commissioning & Support
- Requires a dedicated circuit matching the confirmed 6200W total draw; verify breaker capacity before unboxing
- 500×300×380mm footprint fits a standard workbench; no foundation or anchor bolts needed
- Arrives fully assembled — plug in, attach the 200mm main blade and scoring blade, and run a test cut
- 2.44m maximum cutting length accommodates full sheets; support extension may be needed for over-length panels
- Integrated 1200W vacuum operates on the same circuit; no separate dust collector hose or duct required
- Spare blade list included so you can reorder consumables before the first set dulls
Before You Request a Quote
Tell us the panel materials you cut most often, their typical thickness range, and your local voltage and frequency. Specify the plug type your workshop uses and the language your operators need on the control panel. If you plan to cut sheets longer than 2.44m, mention that so we can advise on support extensions.
Frequently Asked Questions
Q: Is this saw in stock and how fast can it ship?
A: Yes, the Dust-Free Sliding Table Saw in stock is held as ready inventory for single-unit orders. Dispatch timing depends on the voltage and plug configuration you require, since each unit is wired and tested to your specification before crating. Once electrical details are confirmed, we provide a firm dispatch date within one business day.
Q: Will the voltage and plug match my country’s electrical standard?
A: We offer EU, USA, AU, and UK plug options and verify your local voltage and frequency before the machine ships. A written electrical confirmation document accompanies every order. This two-step check prevents the motor damage and production delays that happen when a saw arrives wound for the wrong grid.
Q: Can the control panel labels be in my language?
A: The multilingual control panel is configurable to Chinese, English, Spanish, French, or other languages on request. Your operators will read all labels and interface prompts in their working language from the first power-on, reducing commissioning time and the risk of incorrect settings.
Q: What panel materials and thicknesses does this saw handle cleanly?
A: The 200mm main saw cuts MDF, particleboard, plywood, and solid wood panels up to 40mm thick and 2.44m long. The scoring saw at 13000 r/min produces chip-free bottom edges on melamine-faced and veneered boards, which is the critical requirement for cabinet and furniture components.
Q: What spare blades and consumables ship with the machine?
A: The shipment includes a spare parts list specifying the main blade and scoring blade dimensions. We recommend ordering replacement blades at the time of purchase so you have consumables on hand before the originals reach end of life, avoiding unplanned downtime in a small workshop.
