Description
Compact Voltage-Verified Dispatch — every ST-50 unit leaves the warehouse only after local voltage, frequency, and plug configuration are confirmed on paper, eliminating the three-week transformer wait that stalls unprepared job sites.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | ST-50 |
| Product Type | Manual Edge Banding Machine |
| Total Power | 1000W |
| Voltage & Frequency | 220V/380V, configurable; 50Hz/60Hz to be confirmed at order |
| Edge Banding Mode | Curved and straight edge banding |
| Minimum Sheet Length | 25 cm |
| Minimum Sheet Width | 3 cm |
| Edge Banding Height | 0–50 mm |
| Edge Banding Thickness | 0.3–3 mm |
| Edge Power | 20W |
| Air Source Pressure | 0.5–0.8 MPa |
| Glue Pot Capacity | 1000 ml |
| Product Size | 50 × 50 × 47 cm |
| Net Weight | 22 kg |
| Plug Options | EU, USA, AU, UK |
| Language Options | Chinese, English; Spanish, French, and others available on request |
| Certifications | CE, ISO 9001 |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom furniture edge sealing | MDF, particleboard, plywood panels |
| Small workshop furniture repair and touch-up | Solid wood board, ecological board |
| Home decoration production | PVC and veneer edge banding on substrate panels |
| Manual-to-machine transition environments | Mixed board types in low-volume joinery settings |
Why the Voltage Question Should Come Before the Price on a Manual Edge Banding Machine in Stock
Confirming voltage, frequency, and plug type before dispatch prevents machines from sitting idle on arrival.
I have watched containers land in Jeddah and Riyadh with edge banders wired for a three-phase supply the workshop did not have. The crew spent weeks sourcing step-down transformers while installers sat unpaid. A manual edge banding machine in stock moves fast, but speed means nothing when the machine cannot power on. The ST-50 ships with 220V or 380V configuration and plug format locked in writing before the crate is sealed [NEED_CITE: voltage and frequency standards by export market]. That single confirmation step removes the most common cause of commissioning delays for imported woodworking equipment.
Ready Stock Means Verified Stock, Not Just Warehouse Space
The ST-50 sits in the ready-to-dispatch pool because its 22 kg footprint and 50 × 50 × 47 cm frame allow dense palletizing without specialized crating. Each unit undergoes a pre-shipment power-on test at the configured voltage before packing photographs are taken. Buyers ordering a manual edge banding machine in stock receive those photographs alongside the packing list, so the condition of the machine is documented before it leaves the loading bay.
Single-Unit Orders Without the Minimum-Order Friction
Workshops replacing a broken hand-tool process or adding a second shift often need one machine, not a container load. The ST-50 supports single-unit orders with the same voltage confirmation and pre-shipment test protocol applied to bulk shipments. Dispatch lead time stays short because the unit does not wait to be grouped into a larger consignment [NEED_CITE: typical dispatch timelines for stocked woodworking machinery].
Reading the Spec Sheet Against Real Workshop Conditions
The 0.3–3 mm banding thickness range covers PVC, melamine, and veneer strips commonly used in small-scale furniture production. A 1000 ml glue pot capacity allows extended run time between refills, which matters when an operator is edge-banding cabinet components one at a time. The 0.5–0.8 MPa air source pressure requirement is compatible with standard workshop compressors, so no auxiliary air system is needed. Panel thickness from narrow 3 cm strips up to 50 mm boards can pass through the feed path, handling everything from drawer sides to shelving uprights without fixture changes.
What Happens When Voltage Is Assumed Instead of Confirmed
A 380V machine plugged into a 220V single-phase supply will not start, and the motor winding can overheat during repeated failed attempts. Conversely, a 220V unit receiving 380V risks immediate component damage. These failures are not covered under standard warranty terms because they result from site-side supply mismatch, not manufacturing defect. Confirming the electrical specification at the order stage takes minutes and avoids a loss that can run into thousands of dollars in replacement parts and idle labor [NEED_CITE: CE machinery directive requirements for industrial equipment].
Why Buyers Source This Model Through This Channel
Voltage and plug configuration are confirmed in writing before production or dispatch, so the machine matches the buyer’s local supply on arrival. The four-stage quality check — incoming material, in-process, finished product, and pre-shipment — applies to single ST-50 units the same way it applies to full-line orders. Operation and maintenance manuals ship in the buyer’s agreed language, preventing the situation where an operator cannot read the control panel. The compact frame and 22 kg weight allow air freight or LCL consolidation for buyers who cannot wait for a full container. Engineer-led configuration support means the buyer receives a written recommendation matching the ST-50 to their panel type and production volume before committing.
Documentation & Verification
- CE declaration of conformity referencing the ST-50 manual edge bander classification
- Factory test record documenting power-on run at buyer-specified voltage and frequency
- Electrical schematic with confirmed plug type and circuit rating marked for local electrician
- Operation manual translated into agreed language covering glue pot refill and banding feed setup
- Spare parts list with consumable item codes for glue roller and banding trim blade
- Pre-shipment packing photographs showing crate condition and accessory inclusion
Installation, Commissioning & Support
- Requires a dedicated circuit matching confirmed voltage (220V or 380V) with appropriate breaker rating for the 1000W total power draw
- Air compressor supplying 0.5–0.8 MPa connected via standard quick-fit coupling to the ST-50 air inlet
- Arrives assembled; operator mounts the glue pot and feeds banding material through the guide path on first use
- Initial glue temperature and feed rate settings adjusted during first-run test on buyer’s actual panel stock
- Replacement glue rollers and trimming blades listed in the shipped spare parts sheet for routine replenishment
- Compact 50 × 50 × 47 cm footprint allows bench-top or floor-stand placement without foundation work
Before You Request a Quote
Share the panel materials you work with most often, the edge banding strip thickness you run, and your local supply voltage and frequency. If your workshop operates on a single-phase domestic supply or a specific three-phase standard, note that alongside the plug type used in your region. Mention whether the operator will need the control interface in a language beyond Chinese or English so the manual and any panel markings can be prepared before dispatch.
Frequently Asked Questions
Q: Is this model in stock and what is the dispatch lead time?
A: The ST-50 is held in ready-to-ship inventory. Once voltage, frequency, plug type, and manual language are confirmed in writing, the unit goes through a pre-shipment power-on test and is released for dispatch. Typical lead time from confirmation to carrier handover is short because no build-to-order cycle is required for standard configurations.
Q: How do I confirm the correct voltage and plug type for my country?
A: Provide your workshop supply voltage, phase type, and frequency at the inquiry stage. The configuration is documented on the formal quotation so both parties have a written record. Plug options include EU, USA, AU, and UK formats, and a different format can be accommodated if specified before the unit is packed.
Q: Can the control panel be supplied in a language other than Chinese or English?
A: Spanish, French, and other language options are available on request. Specify the preferred language during the inquiry so the operation manual and any interface markings are prepared before dispatch, avoiding commissioning delays caused by unreadable instructions.
Q: What edge banding materials and thicknesses does the ST-50 handle?
A: The machine accepts PVC, melamine, and veneer strips in the 0.3–3 mm thickness range. It processes both curved and straight edges on MDF, particleboard, plywood, solid wood, and ecological board, covering the materials most common in small workshop and home decoration production.
Q: What spare parts ship with the machine and how do I order replacements?
A: Each ST-50 ships with a spare parts list identifying consumable components such as glue rollers and trimming blades. Replacement parts can be ordered through the same channel used for the original purchase, with item codes printed on the parts list for accurate reordering.
